May-2024 SolarWinds Hybrid-Cloud-Observability-Network-Monitoring Actual Questions and Braindumps
Hybrid-Cloud-Observability-Network-Monitoring Dumps To Pass SolarWinds Exam in 24 Hours - DumpsMaterials
NEW QUESTION # 17
One NetPath probe is showing a "no data found" error, however other probes are returning data without issue.
What is the most likely resolution?
- A. restart the SolarWinds agent service on the node
- B. add the probe ID to the engines table manually
- C. delete the probe, reinstall the agent manually, and re-add the probe
- D. probe was added in NetPath without an agent installed on its node
Answer: C
NEW QUESTION # 18
In which two of the following cases does duplicate flow data occur? (Choose two.)
- A. IP flow ingress on some interfaces and egress on others
- B. both IP flow ingress and egress applied on one interface
- C. both IP flow ingress and egress applied for all interfaces
- D. IP flow ingress applied on all interfaces, no egress usage
Answer: B,C
NEW QUESTION # 19
A device studio poller is being built for a router statistic. It is determined that its object ID (OID) does not exist in SolarWinds' MIB database. What is the best workaround for this situation?
- A. select SNMP and ICMP as the router's polling method
- B. consult vendor and add OID to the database
- C. select manually define object identifier and specify SNMP
- D. download database from customer portal
Answer: C
NEW QUESTION # 20
What is the minimum amount of RAM required for setting up log collection in hybrid cloud observability?
- A. GB
- B. 16 GB
- C. 32 GB
- D. 4 GB
Answer: B
NEW QUESTION # 21
Event logs are to be collected from Windows servers in order to be analyzed in hybrid cloud observability.
Which two of the following actions must be taken in order to accomplish this ask? (Choose two.)
- A. configure server to send logs to another server running the platform
- B. deploy and configure the platform agent to collect the logs
- C. configure a rule on hybrid cloud observability to read event log folder locations
- D. configure a rule on hybrid cloud observability to poll the server and collect logs
Answer: A,B
NEW QUESTION # 22
A node has been added to hybrid cloud observability and shows an "unknown" status until the data is polled.
The default interval for polling status is two minutes.
If the node stays in the "unknown" status longer than the polling interval, which three of the following steps can be performed to resolve the issue? (Choose three.)
- A. Ping device from assigned polling engine.
- B. Verify a pingresponsefor this node is received through the ICMP.
- C. Verify the appropriate polling method is set for this node.
- D. Run SNMP walk on the appropriate node.
Answer: A,B,C
NEW QUESTION # 23
What network capacity planning method is suitable for important devices and connections?
- A. peak calculation
- B. forecast calculation
- C. average calculation
- D. default calculation
Answer: A
NEW QUESTION # 24
To drill down into a log summary for a specific node, where in SolarWinds' platform can a user view these logs?
- A. Node Details Summary > Management > List Resources
- B. My Dashboard > Logs > Log Viewer
- C. Alerts & Activity > Message Center
- D. Node Details Summary > Management > Analyze Logs
Answer: D
NEW QUESTION # 25
A "no data" message is displayed in NetFlow charts. How can this be resolved?
- A. Shorten the time for view and resource.
- B. Refresh the current window.
- C. Restart collector service.
- D. Confirm account has viewing permissions.
Answer: D
NEW QUESTION # 26
Which three of the following are effects of enabling the "resolve IPv4 and IPv6 addresses to DNS hostname" option and disabling the "resolve and store IPv4 hostname immediately when a flow record is received" option? (Choose three.)
- A. amount of database space used to store received flows is reduced
- B. DNS names will not be displayed on top domain resources/reports
- C. number of reads/writes on SQL server linked to name resolution is reduced
- D. amount of database memory used to store DNS information is reduced
Answer: B,C,D
NEW QUESTION # 27
The status of the parent node of several interfaces is showing red. It is determined that several operationally down and administratively shutdown interfaces are included for monitoring of the parent node.
Which menu in the node details summary page of SolarWinds' platform allows users to remove interfaces that are operationally down and administratively shutdown?
- A. polling settings
- B. edit node
- C. List resources
- D. add alert
Answer: C
NEW QUESTION # 28
Which two of the following flow sources are supported by hybrid cloud observability? (Choose two.)
- A. cFlow
- B. J-Flow
- C. Cisco
- D. NetStream
Answer: B,C
NEW QUESTION # 29
Which two of the following data sources can be used for polling devices in device studio? (Choose two.)
- A. polled value by a device on an object ID
- B. night and day standard deviation of calculated value
- C. predicted value from OID baseline
- D. calculated result from transformation of polled values
Answer: A,D
NEW QUESTION # 30
When creating a new rule action, what is the best option to enable if too many events trigger the rule within a short time?
- A. entry count
- B. time window
- C. excessive event
- D. flood protection
Answer: D
NEW QUESTION # 31
Which Cisco IOS feature is enabled to pinpoint an application causing slow network performance?
- A. SPAN
- B. SNMP
- C. IPSLA
- D. Net Flow
Answer: D
NEW QUESTION # 32
Which two of the following statistics are available for network capacity planning? (Choose two.)
- A. memory usage data on nodes
- B. disk space forecast
- C. node temperature
- D. receive utilization on interfaces
Answer: A,D
NEW QUESTION # 33
A universal device poller (UDP) and a transformer are built to display a transform value for a node's CPU temperature, however the value is not transformed as displayed on the web console. Which two of the following reasons could have caused the issue? (Choose two.)
- A. node pollinginterval does not match the custom poller interval
- B. custom poller and transformer are not using same polling interval
- C. pollinginterval for thecustom poller is usingthe default value
- D. custom poller used for transformation is not assigned to same node
Answer: B,D
NEW QUESTION # 34
A brocade G620 switch is not able to poll for hardware health statistics after adding a node using SNMPv3 as the polling method.
Why are hardware health statistics not showing in the node details summary page?
- A. MIB database needs to be updated
- B. device does not support SNMFV3
- C. server configuration box is not checked
- D. switch is not supported for collection
Answer: D
NEW QUESTION # 35
A probe is to be built to test connections to Office 365 from two different locations. How would this be accomplished?
- A. Create two probes and assign each to an agent in each location.
- B. Create two probes and assign each to an agent in one location.
- C. Create both probes on hybrid cloud observability (HCO) server and designate each location.
- D. Create a probe, duplicate it, and change the source agent to the agent in another location.
Answer: A
NEW QUESTION # 36
Which three of the following steps should be taken to troubleshoot a 'test failed' result for SNMP nodes in hybrid cloud observability? (Choose three.)
- A. Verify the node can be pinged from the application server.
- B. Confirm the use ofSNMPv3 with authentication keys.
- C. Add remote site node and confirm firewall rules are configured to allow SNMP traffic.
- D. Verify the SNMP service on the node has been restarted after changing the community string.
Answer: A,C,D
NEW QUESTION # 37
Which two of the following requirements apply to network capacity planning? (Choose two.)
- A. Updated MIB database for network performance forecasting.
- B. Nodes, interfaces, and volumes must be managed in HCO.
- C. Enough historical data is available for the last 7 days.
- D. All object IDs (QIDs) of network devices are polled in hybrid cloud
Answer: B,C
NEW QUESTION # 38
......
Download the Latest Hybrid-Cloud-Observability-Network-Monitoring Dump - 2024 Hybrid-Cloud-Observability-Network-Monitoring Exam Question Bank: https://www.dumpsmaterials.com/Hybrid-Cloud-Observability-Network-Monitoring-real-torrent.html
Buy Latest Hybrid-Cloud-Observability-Network-Monitoring Exam Q&A PDF - One Year Free Update: https://drive.google.com/open?id=1Ss1xzpGDU9yEpiUgd2KKhq_1djtMQRIK
