Free Juniper JN0-450 Exam Questions & Answer from Training Expert DumpsMaterials
Top Juniper JN0-450 Courses Online
Juniper JN0-450 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 12 |
|
| Topic 13 |
|
NEW QUESTION 15
You are troubleshooting a client that has had intermittent connectivity problems. Using Marvis to troubleshoot, you see that AP uptime is negatively affecting the client. When inspecting Marvis' troubleshooting response, which category should you select to see when the AP went offline?
- A. Correlation
- B. Location
- C. AP Metrics
- D. Classifiers
Answer: C
NEW QUESTION 16
How many MHz are used for each OFDM channel in the 2.4 GHz band?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 17
A WxLAN policy does not appear to be working as intended. You determine that a rule further down the list is not being executed. What is the problem in this scenario?
- A. The WxLAN policy supports a limited number of rules; you have too many rules.
- B. The external policy server has intermittent connectivity to the dashboard.
- C. There is a problem with the labels.
- D. The first rule in the list that matches will execute; the other rules will not be considered.
Answer: D
NEW QUESTION 18
Some users are having throughput problems on some devices. You need to understand if users may be on older devices in this situation. Which SLE metric and classifier allows you find this information?
- A. throughput/device capability
- B. throughput/network issues
- C. capacity/client count
- D. capacity/client usage
Answer: A
NEW QUESTION 19
What are three authorization methods allowed for Mist guest portals? (Choose three.)
- A. social logins
- B. authentication code
- C. static MAC
- D. certificates
- E. passphrase
Answer: A,B,E
NEW QUESTION 20
Which two statements are correct about switch adoption? (Choose two.)
- A. Switch adoption requires Mist AP.
- B. Brownfield switch adoption requires manual adoption and is used for switches that do not have a claim or activation code.
- C. Switch adoption uses SSH over TCP port 443.
- D. Greenfield switch adoption requires cloud-enabled switches with a claim or activation code.
Answer: B,D
NEW QUESTION 21
What does a 3dBi antenna do to a received signal?
- A. It increases the power by a factor of 10.
- B. It decreases the power by a factor of 3.
- C. It increases the power by a factor of 2.
- D. It increases the power by a factor of 3.
Answer: D
NEW QUESTION 22
What is the purpose of an SSID?
- A. to identify a unique APPROACH
- B. to identify a unique VLAN
- C. to identify a unique organization
- D. to identify a unique WLAN
Answer: D
NEW QUESTION 23
Which statement is correct about Mist guest portals?
- A. A guest portal is a physical location where guests can go to access Wi-Fi services.
- B. A guest portal is a physical location where clients can access corporate Wi-Fi networks.
- C. A guest portal is a landing page where users can authenticate and access the guest WLAN.
- D. A guest portal is a landing page in the MIST UI where clients can make changes to WLANs.
Answer: C
NEW QUESTION 24
What are two traffic types that would be filtered through a configuration on a WLAN? (Choose two.)
- A. ARP broadcasts
- B. dynamic DNS
- C. DHCP broadcasts
- D. multicast video
Answer: A,D
NEW QUESTION 25
Which encryption protocol is used with WPA2?
- A. RSA
- B. RC4
- C. DES
- D. AES
Answer: D
NEW QUESTION 26
How should Mist AP43 access points be mounted for location-based services?
- A. above the ceiling tile (logo face up)
- B. horizontal (logo face down)
- C. table mounted (logo face up)
- D. vertical (wall mounted)
Answer: B
NEW QUESTION 27
What will the BLE array be doing in the configuration shown in the exhibit?
- A. listening and transmitting
- B. listening only
- C. setting vBLEs
- D. transmitting only
Answer: B
NEW QUESTION 28
What are three ways to claim an AP? (Choose three.)
- A. Enter the AP serial number.
- B. Use the Mist Al application.
- C. Enter the order ID.
- D. Enter the AP claim code.
- E. Enter the activation code.
Answer: B,D,E
NEW QUESTION 29
Which two statements are correct about choosing your Wi-Fi AP's channel? (Choose two.)
- A. Adding another nearby AP on the same channel adds additional capacity for that channel.
- B. When channels are the same, APs will not interfere with one another and cause retransmissions.
- C. Adding another nearby AP on the same channel does not increase the capacity for that channel.
- D. When channels overlap, APs will interfere with one another and cause retransmissions.
Answer: C,D
NEW QUESTION 30
What does Mist's patented 16-element vBLE Antenna Array do when "engagement" is enabled?
- A. locates Wi-Fi assets
- B. performs radio resource management
- C. performs personal pre-shared key sharing
- D. transmits unique and directional BLE beams
Answer: D
NEW QUESTION 31
Users at a branch site are complaining of a slow performing network and your team suspects the issue may be the new network-attached video camera system. You need to monitor the amount of traffic that a specific device has generated over the past week. In this scenario, where in the Mist dashboard would you accomplish this task?
- A. Clients -> App Clients -> select Client Device
- B. Marvis -> type in name of client
- C. Monitor -> Insights -> select Client Device
- D. Analytics -> Events
Answer: C
NEW QUESTION 32
Which two Marvis Wired Assurance actions require a Juniper switch? (Choose two.)
- A. missing VLAN
- B. negotiation mismatch
- C. bad cable
- D. EAP/802.1X failure
Answer: B,C
NEW QUESTION 33
A network engineer is looking to provision a new WLAN through the REST API. Referring to the exhibit, which HTTP method should the request use to achieve this goal?
- A. POST
- B. GET
- C. PUT
- D. DELETE
Answer: A
NEW QUESTION 34
Which statement is correct about wireless assurance?
- A. Wireless assurance can be used to proactively optimize WLAN performance.
- B. Wireless assurance does not require a subscription.
- C. Wireless assurance is a legacy WLAN construct that is difficult to use.
- D. Wireless assurance is used by clients to ensure that a Wi-Fi connection is stable and reliable before joining.
Answer: A
NEW QUESTION 35
You received reports of users not being able to access network resources all day. You know that your network has two DHCP Servers: 10.7.0.24 and 10.1.0.24. Referring to the exhibit, what do you determine?
- A. DHCP is not the cause of the network connectivity issue.
- B. The network's DHCP servers are offline.
- C. There is a rogue DHCP server 10.10.10.10 handing out DHCP leases on your network.
- D. More information is required.
Answer: D
NEW QUESTION 36
Which two components set Mist apart from legacy WLAN platforms? (Choose two.)
- A. decentralized controller
- B. centralized controller
- C. microservices
- D. Virtual Network Assistant
Answer: C,D
NEW QUESTION 37
What are three available rate limiting options in the Mist UI? (Choose three.)
- A. Application
- B. Per-Client
- C. wLan
- D. Network
- E. Per-Site
Answer: A,B,C
NEW QUESTION 38
Which statement about RadSec is correct?
- A. RadSec allows RADIUS authentication over UDP and TLS.
- B. RadSec allows RADIUS authentication over TCP and SSL
- C. RadSec allows RADIUS authentication over TCP and TLS.
- D. RadSec allows RADIUS authentication over UDP and SSL.
Answer: C
NEW QUESTION 39
......
New (2022) Juniper JN0-450 Exam Dumps: https://www.dumpsmaterials.com/JN0-450-real-torrent.html
