[Apr-2023] HPE6-A66 Exam Dumps - Free Demo & 365 Day Updates
Free Sales Ending Soon - Use Real HPE6-A66 PDF Questions
NEW QUESTION # 21
Which feature does the Aruba AP 387 support?
- A. Indoor usage
- B. 802.11 ax
- C. included external directional antennas
- D. 60GHZRF
Answer: D
NEW QUESTION # 22
When determining a customer's agenda and clarifying their expectations for a new HPE/Aruba deployment, which two questions should be asked during the stakeholder checklist? (Select two.)
- A. Which help desk system is deployed?
- B. is a request for proposal or actual bill of materials (BOM) required?
- C. What is your anticipated growth of the environment?
- D. What is the networking experience of onsite personnel?
- E. What business problems are you trying to solve?
Answer: B,E
NEW QUESTION # 23
NewStellar has a main corporate campus in a business park with two adjacent buildings. Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters). The network architect has given you one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters). Assuming that wireless coverage is not required in the central area, which square footage (square meter) value should a network architect use when determining the number of APs in a capacity design for each floor?
- A. 56.350 square feet {5,235 square meters)
- B. 338,100 feet {31,410 square meters)
- C. 55.750 square feet {5,175 square meters)
- D. 47.000 square feet {4,365 square meters)
Answer: A
NEW QUESTION # 24
A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?
- A. 3-10 feet (1-3 m)
- B. 15-30 feet (5-10 m)
- C. 3 feet (1 m)
- D. 30-60 feet (10-20 m)
Answer: C
NEW QUESTION # 25
A company needs an upgrade of its access layer switches. The solution requires that devices connected to the access layer by authenticated and their traffic processed by the firewall features of the Aruba Mobility Controllers. Which solution should the company implement?
- A. GRE tunneling
- B. Dynamic segmentation
- C. iPsec tunneling
- D. PAPI mobility
Answer: C
NEW QUESTION # 26
A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?
- A. 0
- B. 1,030
- C. 1
- D. 2
Answer: B
NEW QUESTION # 27
A network architect is doing a site survey for a new wireless design One concern the company has with the old wireless network is coverage. In some cases, APs would lose power and some employees in the network would lose wireless connectivity. The new design needs to prevent this issue from occurring. During the site survey, what are best practices to be followed in regards to the dBm signal level and the power of the AP to ensure adequate wireless coverage and minimal overlap of AP signals for the new design?
- A. AP power at 75% and a measurement of -90 dBM on the measuring device
- B. AP power at 75% and a measurement of -80 dBM on the measuring device
- C. AP power at 50% and a measurement of -65 dBM on the measuring device
- D. AP power at 100% and a measurement of -65 dBM on the measuring device
Answer: D
NEW QUESTION # 28
A customer currently has sets of three Aruba 5406R switches deployed for an access layer in multiple wiring closets in a building They are clustered in a VSF domain The customer wants to set up Multiple Active Detection (MAD) for the OOBM port, as well as use this port for remote management access. To simplify the connectivity, the customer wants to connect these three switches' OOBM ports to a separate switch in the wiring closet for the OOBM connectivity.
Which would be the most cost-effective solution that would meet the customer's requirements?
- A. 5406R
- B. 2930M
- C. 0
- D. 2930F
Answer: C
NEW QUESTION # 29
A high-end theater venue will be implementing an Aruba wireless solution using ceiling- and wall-mounted APs. The venue wants to ensure the the APs blend into the ceiling and wall environments. What solution should the customer use to ensure that wireless coverage is not hampered?
- A. Order Aruba AP covers for the APs
- B. Paint the APs to match the ceilings or walls
- C. Place a strip of tape over the LEDs
- D. Place the APs above the ceiling and behind the walls
Answer: D
NEW QUESTION # 30
What is the main key for a network design to ensure users have a good experience running their applications'?
- A. Determine the number of users per location.
- B. Provide appropriate AP density.
- C. Provision adequate bandwidth.
- D. Implement appropriate security controls
Answer: B
NEW QUESTION # 31
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?
- A. lAPs in a cluster
- B. FRAPs in a cluster
- C. Two 7205 mobility controller and campus APs in a cluster
- D. Two 7030 mobility controller and campus APs in a cluster
Answer: B
NEW QUESTION # 32
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?
- A. 802.11 ax
- B. S02.11h
- C. 802.11r
- D. S02.11V
Answer: A
NEW QUESTION # 33
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.
- A. A standalone 7008 controller per floor
- B. Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements? O An IAP cluster per floor
- C. Two 7030 mobility controllers in a cluster
- D. Two 7205 mobility controllers in a cluster
Answer: B
NEW QUESTION # 34
When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?
- A. type of users
- B. mobility requirements and usage
- C. number of users per location
- D. density of users
Answer: B
NEW QUESTION # 35
A company has a warehouse that requires ruggedized APs to provide wireless access The APs need to support these characteristics:
* 2 or more spatial streams
* 802.11 ac and 802.11 n support
Cat 7 Ethernet cabling will be used to connect the APs to POE+ capable switches Link aggregation should be employed between the APs and the Ethernet switches. Which would be the most cost-effective solution that would meet the company's requirements?
- A. AP 318 with external omnidirectional antennas
- B. AP 365 with integrated omnidirectional antennas
- C. AP 510 with external omnidirectional antennas and plastic AP cover
- D. AP 375 with external omnidirectional antennas
Answer: A
NEW QUESTION # 36
A network architect has developed a design for a new Aruba Wi-Fi network that will include a hardware Mobility Master (MM) running the ArubaOS 8 4 operating system that will manage:
* Two clustered 7205 controllers with 300 campus APs
* Two clustered VMC-50 controllers with 75 remote APs
The architect plans on creating user roles, firewall policies, and wireless IPS policies on the controllers as well as implementing AirMatch. What would meet the license requirements for this scenario?
- A. LIC-MM-VA-50, LIC-MC-VA-50 (X1), LIC-AP (X300), PEF <x300). RFP (x300)
- B. LIC-MC-VA-50 (X2), LIC-AP (375), PEF (X375), RFP (X375)
- C. LIC-MC-VA-50 (x1), LIC-AP (300), PEF (X300). RFP (x300)
- D. LIC-MM-VA-500. LIC-MC-VA-50 (X2), LIC-AP <x375). PEF (x375). RFP (x375)
Answer: A
NEW QUESTION # 37
A customer requires Aruba switches that support Smart Rate ports to connect to Aruba APs Which switching product should the customer purchase that will provide 24 Smart Rate ports per access layer switch'?
- A. OfficeConnect 1950
- B. Aruba 2540
- C. Aruba 2930F
- D. Aruba 2930M
Answer: D
NEW QUESTION # 38
A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)
- A. number of buildings
- B. number of users
- C. square footage
- D. types of users and their devices
- E. ceiling height
Answer: C,E
NEW QUESTION # 39
A network architect is designing a new wired and wireless solution for for a company. The company has two buildings on a campus, which each building has three floors. The campus core will be placed in the basement of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The maximum distance between a floor's wiring closet and the MDF is 100 feet (30 meters). The maximum distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core.
Based on this information, which type of design should be used and what is the maximum speeds supported all uplinks for the existing the multi-mode fiber?
- A. two-tier and 40 Gbps
- B. three-tier and 40 Gbps
- C. three-tier and 10 Gbps
- D. two-tier and 10 Gbps
Answer: C
NEW QUESTION # 40
A company is installing Internet of Things (loT) devices to support a smart and energy-efficient environment for a building, including loT devices for heating and air conditioning, lights, and window shades. loT devices of these types are typically classified as which category of devices?
- A. Nomadic devices
- B. Highly mobile devices (HMD)
- C. Somewhat mobile devices (SMD)
- D. Stationary devices
Answer: A
NEW QUESTION # 41
A customer has a need to track traffic patterns and anomalies on a pair of ArubaOS-CX 8400 series switches. Which technology will the customer need to deploy for these switches?
- A. 2 CiearPass
- B. NetEdit
- C. Network Analysis Engine
- D. Mobility First
Answer: B
NEW QUESTION # 42
A network architect needs to plan a new wireless network
- A. Central only
- B. Airwave, Central, and Windows only
- C. Airwave and Central only
- D. Airwave, Central, Windows, Mac OSX, and Linux
Answer: C
NEW QUESTION # 43
Which component uniquely defines the BSSID when implementing an employee SSID?
- A. Wireless device MAC address
- B. Case-insensitive SSID name
- C. Case-sensitive SSID name
- D. Radio MAC address
Answer: A
NEW QUESTION # 44
A network architect imports a floorplan defined in a PNG file format What is the function of the measurement tool in Aruba's VisualRF?
- A. Define the appropriate dimensions of a Floorplan and Building View
- B. Define the appropriate dimensions of each room in a Floorplan View
- C. Define the appropriate dimensions of each object in a Floorplan View
- D. Define the appropriate dimensions of a Floorplan View
Answer: C
NEW QUESTION # 45
......
The HP HPE6-A66 (Aruba Certified Design Associate) Exam is a certification exam designed for professionals looking to validate their skills and knowledge in designing Aruba wireless networks. The exam is intended for network architects, engineers, and consultants who seek to design solutions for small to medium-sized businesses and enterprise networks.
The HP HPE6-A66 certification exam is recognized by many organizations and employers around the world as a valuable credential for network design and implementation professionals. Individuals who hold the certification are often sought after by employers who are looking for professionals with the skills and knowledge needed to design and implement complex networks using Aruba networking solutions.
HPE6-A66 Dumps - Pass Your Certification Exam: https://www.dumpsmaterials.com/HPE6-A66-real-torrent.html
Latest Real HP HPE6-A66 Exam Dumps Questions: https://drive.google.com/open?id=1Ay6XCSlIGxiAgoEkVTCaUmLehL7zCXbQ
