UPDATED [Aug 29, 2023] Pass Fortinet NSE 7 - SD-WAN 6.4 Exam with Latest Questions
NSE7_SDW-6.4 Exam Practice Questions prepared by Fortinet Professionals
Fortinet NSE7_SDW-6.4 certification exam is designed for IT professionals who want to gain expertise in software-defined wide area networking (SD-WAN) and Fortinet's related solutions. Fortinet NSE 7 - SD-WAN 6.4 certification test is the latest in the Fortinet NSE 7 certification series dedicated to elevating individuals' knowledge and skills to meet the demands of the digital age. Candidates who pass the Fortinet NSE7_SDW-6.4 accreditation exam demonstrate expertise in SD-WAN, security and routing technologies, expanding their opportunities for career growth and development.
NEW QUESTION # 30
Refer to the exhibit.
Which two statements about the debug output are true? (Choose two)
- A. FortiGate provides statistics and reading based on historical traffic logs.
- B. The debug output shows per-IP shaper values and real-time readings.
- C. Traffic being controlled by the traffic shaper is under 100 KB/s.
- D. This traffic shaper drops traffic that exceeds the set limits.
Answer: C,D
NEW QUESTION # 31
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic.
Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)
- A. The initial session of an application goes through a learning phase in order to apply the correct rule
- B. The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces
- C. The implicit rule overrides all other rules because parameters widely cover sources and destinations.
- D. SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom
Answer: A,C
NEW QUESTION # 32
Which three parameters are available to configure SD-WAN rules? (Choose three.)
- A. Source and destination IP address
- B. Internet service database (ISDB) address object
- C. URL categories
- D. Application signatures
- E. Type of physical link connection
Answer: A,B,D
Explanation:
SD-WAN 6.4.5 Guide Page 76.
https://docs.fortinet.com/document/fortigate/7.2.1/administration-guide/22371/sd-wan-rules-best-quality
NEW QUESTION # 33
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the source NAT global setting and exhibit B shows the routing table on FortiGate Based on the exhibits, which two statements about increasing the port2 interface priority to 20 are true? (Choose two )
- A. All the existing sessions with no SNAT will start using port1 as the outgoing interface instead of port2
- B. All the existing sessions will continue to use port2 and new sessions will use port1
- C. All the existing sessions using SNAT will start using port1 as the outgoing interface instead of port2.
- D. All the existing sessions will be blocked from using port1 and port2
Answer: A,C
NEW QUESTION # 34
Which action FortiGate performs on traffic that is subject to a per-IP traffic shaper of 10 Mbps?
- A. FortiGate limits each source IP address to a maximum bandwidth of 10 Mbps.
- B. FortiGate guarantees a minimum of 10 Mbps of bandwidth to each source IP address.
- C. FortiGate shares 10 Mbps of bandwidth equally among all source IP addresses.
- D. FortiGate applies traffic shaping to the original traffic direction only.
Answer: A
NEW QUESTION # 35
What is the lnkmtd process responsible for?
- A. Processing performance SLA probes
- B. Logging interface quality information
- C. Monitoring links for any bandwidth saturation
- D. Flushing route tags addresses
Answer: A
NEW QUESTION # 36
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the traffic shaping policy and exhibit B show: the firewall policy FortiGate is not performing traffic shaping as expected basi on the policies shown in the exhibits.
To correct this traffic shaping issue on FortiGate, what configuration change must be made on which policy?
- A. The URL category must be specified on the traffic shaping policy
- B. The application control profile must be enabled on the firewall policy.
- C. The shaper mode must be applied per-IP shaper on the traffic shaping policy
- D. The web filter profile must be enabled on the firewall policy
Answer: D
Explanation:
SD-WAN_6.4_Study_Guide page 131
NEW QUESTION # 37
Which diagnostic command can you use to show the SD-WAN rules interface information and state?
- A. diagnose sys virtual-wan-link route-tag-list
- B. diagnose sys virtual-wan-link member.
- C. diagnose sys virtual-wan-link service
- D. diagnose sys virtual-wan-link neighbor.
Answer: D
NEW QUESTION # 38
Refer to the exhibit.
Which two statements about the debug output are correct? (Choose two )
- A. The debug output shows per-lP shaper values and real-time readings.
- B. FortiGate provides statistics and readings based on historical traffic logs.
- C. Traffic being controlled by the traffic shaper is under 1 Kbps
- D. This traffic shaper drops traffic that exceeds the set limits.
Answer: A,B
NEW QUESTION # 39
Which statement is correct about SD-WAN and ADVPN?
- A. You must use OSPF.
- B. SD-WAN does not monitor the health and performance of ADVPN shortcuts.
- C. SD-WAN can steer traffic to ADVPN shortcuts established over IPsec overlays configured as SD-WAN members.
- D. Routes for ADVPN shortcuts must be manually configured.
Answer: C
NEW QUESTION # 40
Which two interfaces are considered overlay links? (Choose two.)
- A. IPsec
- B. Physical
- C. LAG
- D. GRE
Answer: A,D
NEW QUESTION # 41
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SO-WAN interface and the static routes configuration.
Port1 and port2 are member interfaces of the SD-WAN, and port2 becomes a dead member after reaching the failure thresholds Which statement about the dead member is correct?
- A. Subnets 100 .64.1.0/23 and 172 . 20 . 0. 0/16 are reachable only through port1
- B. SD-WAN interface becomes disabled and port1 becomes the WAN interface
- C. Port2 might become alive when a single response is received from an SLA server
- D. Dead members require manual administrator access to bring them back alive
Answer: A
NEW QUESTION # 42
Which CLI command do you use to perform real-time troubleshooting for ADVPN on either a hub or a spoke FortiGate?
- A. get router info routing-table
- B. diagnose sys virtual-wan-link service
- C. get ipsec tunnel list
- D. diagnose debug application ike
Answer: D
NEW QUESTION # 43
Refer to the exhibit.
Based on the output, which two statements are true? (Choose two )
- A. The all_rules rule is the implicit SD-WAN rule in place
- B. There is more than one SD-WAN rule configured
- C. The diagnostic output presents only of the policy routes
- D. At least one policy route is implemented and in effect
Answer: B,C
NEW QUESTION # 44
Refer to exhibits.
Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.
The traffic shaping policy is being applied to all outbound traffic; however, inbound traffic is not being evaluated by the shaping policy.
Based on the exhibits, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic?
- A. A new firewall policy must be created and SD-WAN must be selected as the incoming interface.
- B. The guaranteed-10mbps option must be selected as the per-IP shaper option
- C. The reverse shaper option must be enabled and a traffic shaper must be selected
- D. The guaranteed-10mbps option must be selected as the reverse shaper option.
Answer: D
NEW QUESTION # 45
......
Fortinet NSE7_SDW-6.4 (Fortinet NSE 7 - SD-WAN 6.4) certification exam is an advanced-level exam designed for network and security professionals who work with SD-WAN technologies and Fortinet solutions. NSE7_SDW-6.4 exam covers a wide range of topics and tests the candidate's knowledge and skills in designing, implementing, and managing secure SD-WAN solutions. Fortinet NSE 7 - SD-WAN 6.4 certification is highly valued in the industry and is ideal for professionals who want to enhance their skills and knowledge in SD-WAN technologies and Fortinet solutions.
Fortinet NSE7_SDW-6.4 Exam is a comprehensive exam that covers a wide range of topics related to SD-WAN technology. NSE7_SDW-6.4 exam covers the fundamentals of SD-WAN, including the architecture, components, and benefits of SD-WAN solutions. It also covers the configuration and management of SD-WAN solutions, including site-to-site and remote access VPNs, routing policies, Quality of Service (QoS), and security features. NSE7_SDW-6.4 exam also covers advanced topics such as SD-WAN deployment in cloud environments, SD-WAN orchestration, and troubleshooting.
NSE7_SDW-6.4 Exam Practice Materials Collection: https://www.dumpsmaterials.com/NSE7_SDW-6.4-real-torrent.html
