Pass Your Cisco Exam with 300-615 Exam Dumps (Updated 99 Questions)
300-615 Exam Dumps - Cisco Practice Test Questions
The benefit of obtaining the Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam Certification
- Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure certified professionals have the knowledge to use the tools to complete the task efficiently and cost-effectively than the other non-certified professionals lack in doing so.
- Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Certification is distinguished among competitors.Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure certification can give them an edge at that time easily when candidates appear for a job interview companies look to note something which individualizes the individual to another.
- Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Certification has more useful and relevant networks that help them in setting career goals for themselves.Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure networks provide them with the correct career guidance that non certified generally are unable to get.
- Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Certifications provide opportunities to get a job easily in which they are interested in instead of wasting years and ending without getting any experience.
- Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure certified professionals will be confident and stand different from others as their skills are more trained than non-certified professionals.
- Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Certification provides practical experience to candidates from all the aspects to be a proficient worker in the organization.
Potential Candidates
Cisco CCNP Data Center is an excellent way to authenticate one’s skills and understanding of working with data center solutions, such as handling the processes of installation, design, and maintenance, among the rest. Thus, it is intended for the data center engineers, network designers, network engineers, and administrators who eager to take their competence up a notch. The interested candidates must go through one core exam and one concentration test (for example, 300-615 DCIT). The core exam focuses on the applicants’ general understanding of data center technologies, while the concentration ones are more specialized and industry-oriented. This means that the vendor recommends going for Cisco 300-615 after dealing with the core option. It will prove that you have a good foundation for the next step required in the certification process.
NEW QUESTION 30
A Fibre Channel interface on a Cisco Nexus 5000 Series Switch receives bit errors, and the switch disables the interface. A temporary workaround must be implemented before the root cause is identified. Which action does an engineer take to prevent this issue from reoccurring?
- A. Run the switchport ignore bit-errors command on the interface.
- B. Verify that the SFPs are supported.
- C. Run the shutdown and then no shutdown command on the interface.
- D. Change the SFP to operate at 4 Gbps instead of 2 Gbps.
Answer: A
NEW QUESTION 31
An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?
- A. Install Hypervisor Firmware, then Install Infrastructure Firmware
- B. Install infrastructure Firmware, then Install Hypervisor Firmware.
- C. Install Server Firmware, then Install Infrastructure Firmware
- D. Install Infrastructure Firmware, then Install Server Firmware.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-5/b_GUI_Firmware_Ma
NEW QUESTION 32
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 33
A mission-critical server is connected to site A.
Connectivity to this server is lost from site B because the MAC route is missing in the OTV VDC of the Nexus 7000 in site B due to MAC aging. Which action allows the flooding of the unknown unicast MAC on the Nexus 7000 in the OTV VDC?
- A. Use route-map to advertise this MAC statically and redistribute with ISIS.
- B. Use the otv flood mac <> command to selectively flood traffic for a given MAC.
- C. Use the otv isis bfd <> command to configure BFD protocol.
- D. Unknown unicast flooding is not allowed.
Answer: B
NEW QUESTION 34
An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?
- A. Use AutoInstall to reinstall the firmware.
- B. Restore UCSM configuration from backup.
- C. From the peer IOM, reset the faulty module.
- D. Roll back to the previous firmware.
Answer: D
NEW QUESTION 35
A vPC Type-1 inconsistency between two vPC peers in a VXLAN EVPN setup is discovered. Which two actions need to be attempted to resolve the issue? (Choose two.)
- A. Configure the same VNI to multicast group maping.
- B. Configure the NVE interfaces to be Up on both switches.
- C. Set a different distributed gateway virtual MAC address.
- D. Set a different secondary IP addresses on NVE source-interface.
- E. Set a different primary IP addresses on NVE source-interface.
Answer: A,B
NEW QUESTION 36
Refer to the exhibit. A functioning trunk port Ethernet1/48 exists between two identical Cisco Nexus 5000 Series Switches. The interfaces on the switches support the MACsec feature and are configured identically. To enable manual MACsec, an engineer adds the configuration shown in the exhibit to both sides of the trunk. The trunk port stops functioning. Which action should be taken to resolve the issue?
- A. Disable and then enable the port
- B. Configure the PMK with a length of 2048 bytes
- C. Enable the license for the trunk ports to support MACsec
- D. Lower the MTU value to less than 9216 bytes
Answer: C
NEW QUESTION 37
During a boot process of a Cisco UCS C-Series Rack Server, an engineer receives a "No Signal" message from the vKVM and physical connection. Which set of steps resolves the issue?
- A. 1- Power off the server and disconnect the power cord
2- Confirm that all cards are available
3- Connect the power cord and power on the server - B. 1- Disconnect the power cord
2- Confirm that all cards are properly seated
3- Connect the power cord - C. 1- Disconnect the power cord
2- Confirm that all cards are property seated
3- Connect the power cord and power on the server - D. 1- Power off the server and disconnect the power cord
2- Confirm that all cards are property seated
3- Connect the power cord and power on the server
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/ts/guide/b_C-Series_Troubleshooting_Guide.pd
NEW QUESTION 38
Drag and drop the commands from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION 39
An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?
- A. Install Hypervisor Firmware, then Install Infrastructure Firmware
- B. Install infrastructure Firmware, then Install Hypervisor Firmware.
- C. Install Server Firmware, then Install Infrastructure Firmware
- D. Install Infrastructure Firmware, then Install Server Firmware.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-5/b_GUI_Firmware_Management_25/b_GUI_Firmware_Management_25_chapter_0111.pdf
NEW QUESTION 40
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 41 
Refer to the exhibit. Sw1 and Sw2 are Cisco Nexus 9000 Series Switches that run Cisco NX-OS. They are VTEPs in the same vPC domain. What occurs in this scenario?
- A. Sw2 does not send an IP PIM register to the rendezvous point for the multicast group of the VXLAN VNI.
- B. Sw1 drops all traffic because there is no (S, G) OIF list to encapsulate VXLAN multicast packets and send them to the underlay network through the uplink interfaces.
- C. Sw1 and Sw2 perform the VXLAN multicast encapsulation and decapsulation for all traffic that is associated with the VXLAN VNIs, depending on the hashing.
- D. Sw1 performs the VXLAN multicast encapsulation and decapsulation for all traffic associated with the VXLAN VNIs.
Answer: D
Explanation:
Section: Network
NEW QUESTION 42 
Refer to the exhibit. The EEM script is applied in the default VDC to collect the outputs during high CPU utilization on the Cisco Nexus 7000 Series Switch for all VDCs. Which configuration set must be added to the script to fix the issue?
- A. switch(config-applet)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val
50 poll-interval 1
switch(config-applet)# action 0.2 cli config t
switch(config-applet)# action 0.5 cli switchto vdc Core
switch(config-applet)# action 0.8 cli switchto vdc Distribution - B. switch(config-applet)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-applet)# action 0.2 cli enable switch(config-applet)# action 0.5 cli switchto vdc Core switch(config-applet)# action 0.8 cli switchto vdc Distribution
- C. switch(config-applet)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val
50 poll-interval 1
switch(config-applet)# action 0.2 cli enable
switch(config-applet)# action 0.5 cli switchto vdc Core
switch(config-applet)# action 0.8 cli switchto vdc Distribution - D. switch(config-applet)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val 50 poll-interval 1 switch(config-applet)# action 0.2 cli config t switch(config-applet)# action 0.5 cli switchto vdc Core switch(config-applet)# action 0.8 cli switchto vdc Distribution
Answer: B
Explanation:
Section: Automation
Explanation/Reference: https://community.cisco.com/t5/networking-documents/eem-script-on-nexus-7000-switches-to- monitor-cpu-utilization/ta-p/3120112
NEW QUESTION 43
A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?
- A. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status
4) Reseat the affected IOM. - B. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status.
4) Reseat the affected IOM. - C. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels
2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
3) Check for runtime link down status
4) Reseat the affected IOM. - D. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
3) Check for runtime link down status.
4) Reseat the affected IOM.
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooti
NEW QUESTION 44
Refer to the exhibit.
After the configuration is performed, guestshell continues to use 2%CPU. Which action resolves the issue?
- A. Reboot the switch
- B. Recreate the guestshell
- C. Reboot the guestshell
- D. Resync the database
Answer: C
NEW QUESTION 45
Refer to the exhibit.
The HSRP configuration in the exhibit fails to function. Which action resolves this issue?
- A. Configure HSRP version 2.
- B. Enable IP redirects.
- C. Configure the same HSRP group on both devices.
- D. Set the MTU to 1500 bytes.
Answer: A
NEW QUESTION 46
An engineer enables the packet postcards feature on a Cisco Nexus 9000 Series Switch but receives the error message "Error: Cannot configure postcard when inband-telemetry is configured." Which action resolves the issue?
- A. Disable the telemetry feature
- B. Disable the software-telemetry feature
- C. Disable the inband-telemetry feature
- D. Disable the hardware-telemetry feature
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/progammability/guide/b-cisco-nex
NEW QUESTION 47
An engineer is troubleshooting a packet flow from an access leaf to spine. Which EVPN routes are expected on this connection?
- A. EVPN Type 9-15
- B. EVPN Type 0,16
- C. EVPN Type 1-5
- D. EVPN Type 0,9,15
Answer: C
Explanation:
Section: Network
Explanation
NEW QUESTION 48
When the engineer runs the command, this error is received:
opsengineer@wkst1:/home/auto/bash_scripts$ curl -s -b cookie_file_39422186.txt -X GET -k 192.15.132.101/api/node/class/Tenant.json {"totalCount":"1","imdata":[{"error":{"attributes":{"code":"400","text":"Request failed, (output omitted)"}}}]} Which action resolves the issue?
- A. Add the -c class Tenant flag to the cURL command
- B. Change the HTTP verb to POST
- C. Modify the URI to 192.15.132.101/api/node/class/fvTenant.json
- D. Regenerate the API token object
Answer: C
Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/DEVNET-2000.pdf
NEW QUESTION 49
An engineer discovers that an NPV/NPIV uplink experiences a heavy load and plans to add more uplinks.
Which statement about what occurs when the new uplinks are added is true?
- A. New and existing connections use the new uplinks automatically.
- B. Paths must be defined before new connections can use the new uplinks.
- C. All connections must be reset before the new uplinks can be used.
- D. Only new connections use the new uplinks automatically.
Answer: A
Explanation:
Section: Storage Network
NEW QUESTION 50
An engineer enables the packet postcards feature on a Cisco Nexus 9000 Series Switch but receives this error message:
"Error: Cannot configure postcard when inband-telemetry is configured." Which action resolves the issue?
- A. Disable the hardware-telemetry feature.
- B. Disable the telemetry feature.
- C. Disable the inband-telemetry feature.
- D. Disable the software-telemetry feature.
Answer: A
Explanation:
Section: Management and Operations
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/92x/programmability/ guide/b-cisco-nexus-9000-series-nx-os-programmability-guide-92x/b-cisco-nexus-9000-series-nx-os- programmability-guide-92x_chapter_0100001.html
NEW QUESTION 51
Refer to the exhibit.
HSRP adjacency fails to form between Nexus7K-1 and Nexus7K-2. Which action should be taken to solve the problem?
- A. Configure the same HSRP priority between the two switches.
- B. Configure HSRP version 2 on Nexus7K-2.
- C. Configure preempt on one of the switches in the HSRP group.
- D. Configure the correct subnet mask on Nexus7K-1.
Answer: B
NEW QUESTION 52
Refer to the exhibit.
The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?
- A. event statement
- B. configure terminal action
- C. event-default action statement
- D. environment variable
Answer: A
NEW QUESTION 53 
Refer to the exhibit. An engineer is performing a health check on ACI. Which statement about interface Ethernet 1/11 is true?
- A. "out-of-service" indicates that no service graph is in use for this interface.
- B. The interface is working correctly and fully operational, but it is not in use.
- C. "out-of-service" is the default interface status in ACI.
- D. The interface policy is misconfigured.
Answer: D
Explanation:
Section: Compute Platforms
NEW QUESTION 54 
Refer to the exhibit. When an engineer inserts 8-Gb FC SFP port 15 on a Cisco UCS Fabric Interconnect, the port fails. What is a possible cause of the issue?
- A. The polarity of the fiber cable is reversed.
- B. Port 15 is configured as an Ethernet port.
- C. Port 15 is missing a license.
- D. Port 15 is configured for 4-Gb FC.
Answer: D
Explanation:
Section: Storage Network
NEW QUESTION 55
......
Who should take the Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam
The 300-615 exam test certification is an internationally-recognized validation that identifies persons who earn it as possessing skilled in Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure i.e. Cisco routing and switching infrastructure devices like router, switches, etc. If a candidate/professional seeks a powerful improvement in career growth needs enhanced knowledge, skills, and talents. The Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam certification provides proof of this advanced knowledge and skill. If a candidate knows associated technologies and skills that are required to pass Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam then he should take this exam. These are candidates who should look for Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure
- Cisco field support technicians
- Support engineers
New Real 300-615 Exam Dumps Questions: https://drive.google.com/open?id=1xdJ6hsIBNPRVCYfbY_dPZbHhP41h9OLP
Pass Your 300-615 Exam Easily with Accurate PDF Questions: https://www.dumpsmaterials.com/300-615-real-torrent.html
