Pass C-TPLM30-67 Exam - Real Test Engine PDF with 97 Questions
Get New C-TPLM30-67 Certification Practice Test Questions Exam Dumps
SAP C-TPLM30-67 Exam Description:
The "SAP Certified Application Associate - SAP Maintenance & Repair with ERP 6.0 EHP7" certification exam verifies that the candidate possesses basic knowledge in the area of SAP Plant Maintenance. This certificate proves that the candidate has the required understanding within this consultant profile of the ERP solution, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Maintenance & Repair.
NEW QUESTION 45
Which standard aggregation of data does the Plant Maintenance Information System (PMIS) use? (Choose three)
- A. By characteristics
- B. By data source
- C. By key figures
- D. By date period
- E. By info source
Answer: A,C,D
NEW QUESTION 46
Your customer plans a plant shutdown and wants to use the Maintenance Event Builder to plan revisions and create maintenance orders automatically.
What must you do in Customizing?
- A. Define transfer of project or investment program
- B. Create a revision type and select Not WPS-Controlled.
- C. Define field values for PM/PS Reference Element
- D. Create a revision type and select WPS-Controlled.
Answer: D
NEW QUESTION 47
What are the prerequisites for installing equipment at a functional location? (Choose two)
- A. A cost center is assigned to the equipment.
- B. The functional location master record allows the installation.
- C. The equipment category of the equipment allows the installation.
- D. A fixed asset is assigned to the equipment.
Answer: B,C
NEW QUESTION 48
A customer notices a volume is using an above average amount of Tier 1 RAID 10 space. What can be done to force this data into a lower RAID set/Tier?
- A. Take a manual snapshot
- B. Stop I/O to the volume
- C. Change the storage profile of the volume
- D. Move data to a different volume
Answer: A
NEW QUESTION 49
Your customer plans a plant shutdown and wants to use the Maintenance Event Builder to plan revisions and create maintenance orders automatically.
What must you do in Customizing?
- A. Define transfer of project or investment program
- B. Create a revision type and select Not WPS-Controlled.
- C. Define field values for PM/PS Reference Element
- D. Create a revision type and select WPS-Controlled.
Answer: D
NEW QUESTION 50
Your customer uses operating hours to execute a performance-based maintenance plan.
Which of the following data must you assign in the maintenance plan header?
- A. An order type for performance-based maintenance
- B. A technical object with a measuring point
- C. A task list for performance-based maintenance
- D. A cycle unit of measure with a corresponding characteristic from the measuring point
Answer: D
NEW QUESTION 51
Which account assignment category can you specify in a settlement profile?
Please choose the correct answer.
Response:
- A. Maintenance planning plant
- B. Equipment
- C. Functional location
- D. Materia
Answer: D
NEW QUESTION 52
You are testing a new SC7020 storage array. You decided to deploy a temporary installation of Dell Storage Manager (DSM) Data Collector with an embedded database. What is the maximum number of days in which array information can be retained?
- A. 90 days
- B. 30 days
- C. 60 days
- D. 15 days
Answer: B
Explanation:
Explanation/Reference: https://topics-cdn.dell.com/pdf/storage-sc2000_install-guide_en-us.pdf (p.11)
NEW QUESTION 53
Refer to the exhibit.
Which port on the second SC280 expansion enclosure is used to connect the first expansion enclosure to the second expansion enclosure on the A-side of this configuration?
- A. A = Port A, left EMM
- B. D = Port B, Right EMM
- C. C = Port C, Left EMM
- D. B = Port B, Left EMM
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 54
Where do you define initial and subsequent buffers for the maintenance plan strategy?
- A. In the maintenance package for the maintenance strategy
- B. In the maintenance plan scheduling parameters
- C. In the maintenance item
- D. In the maintenance plan category settings
Answer: A
NEW QUESTION 55
Your customer wants to subdivide the maintenance organization by production responsibility.
What do you use to designate the contact person for coordination between production and plant maintenance?
Please choose the correct answer.
Response:
- A. Production cost center
- B. Plant section
- C. Work center
- D. Controlling area
Answer: B
NEW QUESTION 56
You are deploying a new SCv2020 system with four additional SCv100 expansion enclosures. What is the spare-to-managed drive ratio?
- A. 1 spare for every 20 managed drives of that drive type
- B. 1 spare for every drive of that type per enclosure
- C. 1 spare per enclosure regardless of the drive type
- D. 1 spare for every 24 managed drives of that drive type
Answer: A
NEW QUESTION 57
How is a new functional location initially assigned to its place in the hierarchy?
Please choose the correct answer.
Response:
- A. Automatically based on the structure indicator
- B. Automatically based on the Bill of Material (BOM)
- C. Manually using the Install transaction
- D. Manually using the List Editing transaction
Answer: A
NEW QUESTION 58
You are installing a new SC9000. Which procedure should be used to install and configure the system?
- A. Connect through a null modem cable to the serial port
- B. Connect through the Dell Storage Manager Client
- C. Connect through the supplied proprietary serial cable to the serial port
- D. Connect through the iDRAC port
Answer: C
NEW QUESTION 59
Under which conditions you can change stock information in the serial number manually.
There are 2 correct answers to this question.
Response:
- A. No stock check is active
- B. BOM active
- C. Sterilization operation
- D. All active
- E. No plant has been entered
Answer: A,E
NEW QUESTION 60
Identify the resource that enables you to represent the wear and tear of an object.
Please choose the correct answer.
Response:
- A. Points
- B. Counters
- C. Control
- D. Items
Answer: B
NEW QUESTION 61
Your customer wants to view a list of all planned materials in multiple maintenance orders with order status CRTD. Which of the following standard reports can you use to find the information required? (Choose three.)
- A. The operation list
- B. The order list
- C. The materials where-used report
- D. The material availability report
- E. The order and operation list
Answer: B,D,E
NEW QUESTION 62
Based on the exhibit, a customer is using a Virtual Port Mode configuration. If the cable for Domain 1 on Controller 1 is disconnected during failover testing, will the SC Series array port failover work?
- A. Yes, the configuration will provide port failover regardless of domains or mode.
- B. No, port failover only works in Legacy Port Mode.
- C. Yes, the configuration will provide port failover as the system is configured for Virtual Port Mode.
- D. No, the configuration contains only a single port per domain and will not provide port failover.
Answer: C
NEW QUESTION 63
A customer wants to add an iSCSI path to a Microsoft Windows Server 2012 R1. The server has an existing Fibre Channel path to an SC7020 array for load balancing and high availability.
Which Windows MPIO policy should be configured to achieve the customer's requirement?
- A. Round Robin
- B. Round Robin with Subset
- C. Fail Over Only
- D. Weighted Paths
Answer: A
Explanation:
Explanation/Reference: https://www.google.com/url?
sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=2ahUKEwig4LmO8KHcAhWDORQKHWpC CRQQFjAAegQIAxAC&url=http%3A%2F%2Fen.community.dell.com%2Fcfs-file%2F__key%2Ftelligent- evolution-components-attachments%2F13-4491-00-00-20-43-93-10%
2FSC_2D00_Series_2D00_Synchronous_2D00_Replication_2D00_and_2D00_Live_2D00_Volume_2D00_Dell
_2D00_EMC_2D00_2017_2D002800_CML1064_2900_.pdf%3Fforcedownload%
3Dtrue&usg=AOvVaw2U039ZfRgHPhpM3KkHmN4z
NEW QUESTION 64
A user has planned an operation with labor costs and material costs; however, the material cost element is not assigned to a value category. Where do the material costs appear in the value categories for the order?
Please choose the correct answer.
Response:
- A. In the internal activity value category
- B. In the overhead value category
- C. In a new, automatically created value category
- D. In the unassigned value category
Answer: D
NEW QUESTION 65
In a refurbishment order for external processing, where can you find information about the defective part after the goods issue has been posted?
- A. In special stock type B (batch) after the return from the service company and a goods receipt posting
- B. In special stock type R (refurbishment stock), after the return from the service company and a goods receipt posting
- C. In special stock type F (customer order stock)
- D. In special stock type O (parts provided to vendor)
Answer: D
NEW QUESTION 66
......
C-TPLM30-67 Exam Certification Details:
| Cut Score: | 51% |
| Duration: | 180 mins |
| Languages: | German, English |
C-TPLM30-67 Exam Dumps - PDF Questions and Testing Engine: https://www.dumpsmaterials.com/C-TPLM30-67-real-torrent.html
