New OGEA-101 Dumps For Preparing Enterprise Architecture Certified The Open Group Exam Well
Updated OGEA-101 Dumps Questions Are Available [2026] For Passing The Open Group Exam
The Open Group OGEA-101 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION # 47
Which of the following statements about architecture partitioning is correct?
- A. Partitions are equivalent to architecture levels.
- B. Partitions are used to simplify the management of the Enterprise Architecture.
- C. Partitions reflect the organization's structure.
- D. Partitions are defined and assigned to agile Enterprise Architecture teams.
Answer: B
Explanation:
Based on the web search results, architecture partitioning is a technique that divides the Enterprise Architecture into smaller and manageable segments or groups, based on various classification criteria, such as subject matter, time, maturity, volatility, etc.12 Architecture partitioning is used to simplify the development and management of the Enterprise Architecture, by reducing complexity, improving governance, enhancing reusability, and increasing alignment and agility12. Therefore, the statement that partitions are used to simplify the management of the Enterprise Architecture is correct.
The other statements are incorrect because:
*Partitions are not equivalent to architecture levels. Architecture levels are different layers of abstraction that describe the Enterprise Architecture from different perspectives, such as strategic, segment, and capability3.
Partitions are subsets of architectures that are defined within or across the levels, based on specific criteria1.
*Partitions do not necessarily reflect the organization's structure. The organization's structure is one possible criterion for partitioning the architecture, but it is not the only one. Other criteria, such as business function, product, service, geography, etc., can also be used to partition the architecture12.
*Partitions are not defined and assigned to agile Enterprise Architecture teams. Agile Enterprise Architecture is an approach that applies agile principles and practices to the architecture work, such as iterative development, frequent feedback, adaptive planning, and continuous delivery4. Partitions are not a specific feature of agile Enterprise Architecture, but a general technique that can be applied to any architecture method or framework, including TOGAF12.
NEW QUESTION # 48
Which ADM Phase provides architectural oversight of the implementation?
- A. Phase G
- B. Phase A
- C. Phase H
- D. Preliminary
Answer: A
Explanation:
* Phase G: Implementation Governance provides architectural oversight of the implementation. It ensures that the implementation conforms to the Target Architecture using Architecture Contracts and governance frameworks.
* Phase H: Architecture Change Management is about maintaining the architecture lifecycle and handling new requirements, not direct implementation oversight.
* Preliminary Phase is about setting up the architecture capability.
* Phase A is about developing the Architecture Vision.
Reference: TOGAF Standard, Version 9.2, Part II: ADM, Phase G.
NEW QUESTION # 49
Complete the sentence. The architecture domains that are considered by the TOGAF standard as subsets of an overall enterprise architecture are Business, Technology,
- A. Application and Data
- B. Capability and Segment
- C. Information and Data
- D. Logical and Physical
Answer: A
Explanation:
These domains provide a consistent way to describe and understand the architecture from different perspectives, such as business, information, and technology12. Each domain has its own set of concepts, models, views, and artifacts that define the structure and behavior of the architecture within that domain12.
The other options are incorrect because:
*Logical and Physical are not architecture domains, but rather levels of abstraction that can be applied to any domain. Logical architecture describes the functionality and behavior of the system, while physical architecture describes the implementation and deployment of the system3.
*Information and Data are not distinct architecture domains, but rather aspects of the same domain.
Information architecture describes the meaning and context of the data, while data architecture describes the structure and format of the data4.
*Capability and Segment are not architecture domains, but rather levels of granularity that can be applied to any domain. Capability architecture describes the current and desired states of a specific business capability, while segment architecture describes a subdivision of the enterprise that has a clear business focus5.
NEW QUESTION # 50
Complete the sentence. The purpose of the Gap Analysis technique is to _____.
- A. establish quality metrics for the architecture
- B. identify non-functional requirements for the architecture
- C. validate the architecture
- D. determine service levels for the architecture
Answer: C
Explanation:
Comprehensive and Detailed Explanation
Gap Analysis is an ADM technique used in Phases B, C, and D of the TOGAF ADM (Business, Information Systems, and Technology Architectures).
Its main purpose is to validate the target architecture by comparing the Baseline Architecture with the Target Architecture and identifying:
* Gaps (building blocks or capabilities present in the target but missing in the baseline).
* Overlaps (building blocks duplicated across architectures).
* Conflicts (inconsistencies between baseline and target).
The output of Gap Analysis provides:
* A validated Target Architecture.
* A set of identified gaps that must be addressed by future work packages in Phase E: Opportunities and Solutions.
Therefore, the purpose of Gap Analysis is best expressed as to validate the architecture (Answer D).
Why the other options are incorrect
* A. Establish quality metrics for the architecture: This is part of performance management and governance, not Gap Analysis.
* B. Identify non-functional requirements: Non-functional requirements are captured through requirements management and stakeholder analysis, not Gap Analysis.
* C. Determine service levels: Service levels are typically defined in SLAs and operational models, not through Gap Analysis.
References
* The Open Group, TOGAF Standard, Version 9.2, Part III: ADM Guidelines & Techniques - Gap Analysis.
* The Open Group, TOGAF 9 Certified Study Guide - explains the role of Gap Analysis in validating architectures and identifying work package inputs.
NEW QUESTION # 51
Which of the following is included as part of Architecture Governance1?
- A. Interacting with the CxO level on Enterprise Architecture
- B. Ensuring compliance with internal and external standards and regulatory obligations
- C. Creating and maintaining the Statement of Architecture Work though out the ADM cycle
- D. Managing Stakeholders and their requirements
Answer: B
Explanation:
Ensuring compliance with internal and external standards and regulatory obligations is one of the activities included as part of Architecture Governance. Architecture Governance is the practice and orientation by which enterprise architectures and other architectures are managed and controlled at an enterprise-wide level. It involves establishing processes, roles, responsibilities, policies, and standards to ensure that architectures are aligned with the enterprise's strategy and objectives, and meet the quality and performance requirements. Reference: The TOGAFStandard | The Open Group Website, Section 3.3.6 Architecture Governance.
NEW QUESTION # 52
Consider the following chart:
Which important concept for Enterprise Architecture Practitioners does it illustrate?
- A. ADM phases must be run in a sequenced approach to produce the Architecture.
- B. ADM phases must be run simultaneously until the relevant information has been produced.
- C. Enterprise Architects must use Gantt charts to communicate with Stakeholders.
- D. An Enterprise Architecture must be developed in phases with a limited fixed duration.
Answer: A
Explanation:
The chart shown is a Gantt chart, which is commonly used for project management to illustrate a project schedule. In the context of TOGAF (The Open Group Architecture Framework), which is a framework for enterprise architecture, this Gantt chart is demonstrating the sequenced approach to the Architecture Development Method (ADM). The ADM is the core process of TOGAF which provides a tested and repeatable process for developing architectures. The ADM is described as being iterative, over the whole process, between phases, and within phases. For each iteration of the ADM, a fresh decision must be taken about each of the parameters (scope, granularity, time period, and architecture assets).
The ADM consists of a number of phases that have to be followed in sequence:
Preliminary Phase: Framework and principles
Phase A: Architecture Vision
Phase B: Business Architecture
Phase C: Information Systems Architectures, including Data and Application Architectures Phase D: Technology Architecture Phase E: Opportunities and Solutions Phase F: Migration Planning Phase G: Implementation Governance Phase H: Architecture Change Management Requirements Management Each phase is dependent on the outputs of the previous phase and the Requirements Management phase runs throughout. The Gantt chart clearly shows the dependency and sequence in which these phases occur, implying that a structured approach is followed to produce the enterprise architecture.
The TOGAF Standard, Version 9.2, a standard of The Open Group
The TOGAF documentation available at https://publications.opengroup.org/standards/architecture and
https://publications.opengroup.org/guides/architecture
NEW QUESTION # 53
Consider the following descriptions of deliverables consumed and produced across the TOGAF ADM cycle.
General rules and guidelines, intended to be enduring and seldom
amended, that inform and support the way in which an organization sets
about fulfilling its mission
The joint agreements between development partners and sponsors on the
deliverables, quality, and fitness-for-purpose of an architecture.
A document that is sent from the sponsoring organization to the
architecture organization to trigger the start of an architecture
development cycle
A set of quantitative statements that outline what an implementation
project must do in order to comply with the architecture.
Which deliverables match these descriptions?
1 Architecture Principles -2 Architecture Contracts - 3 Request for Architecture Work - 4 Architecture Requirements Specification
1 Architecture Contracts - 2 Architecture Requirements Specification - 3 Architecture Vision - 4 Architecture Principles
1 Architecture Requirements Specification -2 Architecture Principles - 3 Architecture Vision - 4 Architecture Contracts
1 Architecture Principles -2 Architecture Contracts - 3 Architecture Requirements Specification-4 Request for Architecture Work
Answer:
Explanation:
According to the TOGAF standard, the deliverables that match the descriptions are as follows:
1 Architecture Principles: These are general rules and guidelines, intended to be enduring and seldom amended, that inform and support the way in which an organization sets about fulfilling its mission1. They reflect a level of consensus among the various elements of the enterprise, and form the basis for making future IT decisions1.
2 Architecture Contracts: These are the joint agreements between development partners and sponsors on the deliverables, quality, and fitness-for-purpose of an architecture2. They are used to ensure that the architecture is implemented and governed according to the agreed-upon specifications and standards2.
3 Request for Architecture Work: This is a document that is sent from the sponsoring organization to the architecture organization to trigger the start of an architecture development cycle3. It defines the scope, schedule, budget, deliverables, and stakeholders of the architecture project3.
4 Architecture Requirements Specification: This is a set of quantitative statements that outline what an implementation project must do in order to comply with the architecture4. It defines the requirements for each architecture domain, as well as the relationships and dependencies among them4.
1: Architecture Principles 2: Architecture Contracts 3: Request for Architecture Work 4: Architecture Requirements Specification
NEW QUESTION # 54
Complete the sentence. A business scenario describes
- A. general rules and guidelines for the architecture being developed
- B. business domain gaps, such as cross-training requirements
- C. business and technology environment in which those problems occur
- D. shortfalls between the Baseline and Target Architectures
Answer: C
NEW QUESTION # 55
Consider the following descriptions of deliverables consumed and produced across the TOGAF ADM cycle.
* General rules and guidelines, intended to be enduring and seldom
amended, that inform and support the way in which an organization sets
about fulfilling its mission
* The joint agreements between development partners and sponsors on the deliverables, quality, and fitness-for-purpose of an architecture.
* A document that is sent from the sponsoring organization to the
architecture organization to trigger the start of an architecture
development cycle
* A set of quantitative statements that outline what an implementation
project must do in order to comply with the architecture.
Which deliverables match these descriptions?
* 1 Architecture Principles -2 Architecture Contracts - 3 Request for Architecture Work - 4 Architecture Requirements Specification
* 1 Architecture Contracts - 2 Architecture Requirements Specification - 3 Architecture Vision - 4 Architecture Principles
* 1 Architecture Requirements Specification -2 Architecture Principles - 3 Architecture Vision - 4 Architecture Contracts
1 Architecture Principles -2 Architecture Contracts - 3 Architecture Requirements Specification-4 Request for chitecture Work Explanation:
Answer:
Explanation:
According to the TOGAF standard, the deliverables that match the descriptions are as follows:
* 1 Architecture Principles: These are general rules and guidelines, intended to be enduring and seldom amended, that inform and support the way in which an organization sets about fulfilling its mission1. They reflect a level of consensus among the various elements of the enterprise, and form the basis for making future IT decisions1.
* 2 Architecture Contracts: These are the joint agreements between development partners and sponsors on the deliverables, quality, and fitness-for-purpose of an architecture2. They are used to ensure that the architecture is implemented and governed according to the agreed-upon specifications and standards2.
* 3 Request for Architecture Work: This is a document that is sent from the sponsoring organization to the architecture organization to trigger the start of an architecture development cycle3. It defines the scope, schedule, budget, deliverables, and stakeholders of the architecture project3.
* 4 Architecture Requirements Specification: This is a set of quantitative statements that outline what an implementation project must do in order to comply with the architecture4. It defines the requirements for each architecture domain, as well as the relationships and dependencies among them4.
NEW QUESTION # 56
Consider the following chart:
Which important concept for Enterprise Architecture Practitioners does it illustrate?
- A. ADM phases must be run in a sequenced approach to produce the Architecture.
- B. ADM phases must be run simultaneously until the relevant information has been produced.
- C. Enterprise Architects must use Gantt charts to communicate with Stakeholders.
- D. An Enterprise Architecture must be developed in phases with a limited fixed duration.
Answer: A
Explanation:
The chart shown is a Gantt chart, which is commonly used for project management to illustrate a project schedule. In the context of TOGAF (The Open Group Architecture Framework), which is a framework for enterprise architecture, this Gantt chart is demonstrating the sequenced approach to the Architecture Development Method (ADM). The ADM is the core process of TOGAF which provides a tested and repeatable process for developing architectures. The ADM is described as being iterative, over the whole process, between phases, and within phases. For each iteration of the ADM, a fresh decision must be taken about each of the parameters (scope, granularity, time period, and architecture assets).
The ADM consists of a number of phases that have to be followed in sequence:
* Preliminary Phase: Framework and principles
* Phase A: Architecture Vision
* Phase B: Business Architecture
* Phase C: Information Systems Architectures, including Data and Application Architectures
* Phase D: Technology Architecture
* Phase E: Opportunities and Solutions
* Phase F: Migration Planning
* Phase G: Implementation Governance
* Phase H: Architecture Change Management
* Requirements Management
Each phase is dependent on the outputs of the previous phase and the Requirements Management phase runs throughout. The Gantt chart clearly shows the dependency and sequence in which these phases occur, implying that a structured approach is followed to produce the enterprise architecture.
Reference:
* The TOGAF Standard, Version 9.2, a standard of The Open Group
* The TOGAF documentation available at https://publications.opengroup.org/standards/architecture and https://publications.opengroup.org/guides/architecture
NEW QUESTION # 57
Which of the following is a purpose of Phase A of the TOGAF ADM?
- A. Describing the target architecture
- B. Identifying key stakeholders
- C. Defining the Enterprise strategy
- D. Developing an Enterprise Architecture Capability
Answer: B
Explanation:
* Phase A: Architecture Vision identifies stakeholders, their concerns, and defines the scope and objectives of the architecture engagement.
* Defining enterprise strategy is outside ADM (it is a business planning activity).
* Describing the target architecture happens in Phases B, C, and D.
* Developing an EA Capability is done in the Preliminary Phase, not Phase A.
Reference: TOGAF Standard, Version 9.2, Part II: ADM, Phase A.
NEW QUESTION # 58
Consider the following chart:
Which important concept for Enterprise Architecture Practitioners does it illustrate?
- A. ADM phases must be run in a sequenced approach to produce the Architecture.
- B. ADM phases must be run simultaneously until the relevant information has been produced.
- C. Enterprise Architects must use Gantt charts to communicate with Stakeholders.
- D. An Enterprise Architecture must be developed in phases with a limited fixed duration.
Answer: A
Explanation:
The chart shown is a Gantt chart, which is commonly used for project management to illustrate a project schedule. In the context of TOGAF (The Open Group Architecture Framework), which is a framework for enterprise architecture, this Gantt chart is demonstrating the sequenced approach to the Architecture Development Method (ADM). The ADM is the core process of TOGAF which provides a tested and repeatable process for developing architectures. The ADM is described as being iterative, over the whole process, between phases, and within phases. For each iteration of the ADM, a fresh decision must be taken about each of the parameters (scope, granularity, time period, and architecture assets).
The ADM consists of a number of phases that have to be followed in sequence:
Preliminary Phase: Framework and principles
Phase A: Architecture Vision
Phase B: Business Architecture
Phase C: Information Systems Architectures, including Data and Application Architectures Phase D: Technology Architecture Phase E: Opportunities and Solutions Phase F: Migration Planning Phase G: Implementation Governance Phase H: Architecture Change Management Requirements Management Each phase is dependent on the outputs of the previous phase and the Requirements Management phase runs throughout. The Gantt chart clearly shows the dependency and sequence in which these phases occur, implying that a structured approach is followed to produce the enterprise architecture.
Reference:
The TOGAF Standard, Version 9.2, a standard of The Open Group
The TOGAF documentation available at https://publications.opengroup.org/standards/architecture and https://publications.opengroup.org/guides/architecture
NEW QUESTION # 59
Complete the sentence. When considering agile development, Architecture to Support Project will identify what products the Enterprise needs, the boundary of the products, and what constraints a product owner has; this defines the Enterprise's ____________
- A. lifecycle economics
- B. workflow management
- C. operations
- D. backlog
Answer: B
NEW QUESTION # 60
Complete the sentence The Architecture Landscape is divided into levels known as__________________________.
- A. Gaps Plateaus, and Target Architectures
- B. Baseline. Transition and To Be Architectures
- C. Transitional Complete and incremental Architectures
- D. Segment Strategic and Capability Architectures
Answer: D
Explanation:
The Architecture Landscape is divided into levels known as Segment Strategic and Capability Architectures. These levels correspond to different scopes and purposes of architectures within an enterprise. Segment Architectures are architectures that address specific business units, functions, or processes within an enterprise. Strategic Architectures are architectures that provide a high-level view of the enterprise's vision, goals, and direction. Capability Architectures are architectures that address specific business capabilities or services that span multiple segments or domains. Reference: The TOGAF Standard | The Open Group Website, Section 2.4 Architecture Repository.
NEW QUESTION # 61
What does the TOGAF ADM recommend for use in developing an Architecture Vision document?
- A. Requirements Management
- B. Business Scenarios
- C. Architecture Principles
- D. Gap Analysis
Answer: B
Explanation:
Business scenarios are a technique recommended by the TOGAF ADM for use in developing an Architecture Vision document12. Business scenarios are a means of capturing the business requirements and drivers, the processes and actors involved, and the desired outcomes and measures of success34. Business scenarios help to create a common vision and understanding among the stakeholders, and to identify and validate the architecture requirements . Business scenarios also provide a basis for analyzing the impact and value of the proposed architecture. Reference:
* The TOGAF Standard, Version 9.2 - Phase A: Architecture Vision - The Open Group
* TOGAF Standard - Introduction - Phase A: Architecture Vision
* The TOGAF Standard, Version 9.2 - Definitions - The Open Group
* Business Scenarios - The Open Group
* [The TOGAF Standard, Version 9.2 - Architecture Requirements Specification - The Open Group]
* [The TOGAF Standard, Version 9.2 - Architecture Vision - The Open Group]
* [The TOGAF Standard, Version 9.2 - Business Transformation Readiness Assessment - The Open Group]
NEW QUESTION # 62
Consider the following descriptions of deliverables consumed and produced across the TOGAF ADM cycle.
2) A set of quantitative statements that outline what an implementation project must do in order to comply with the architecture.
4) The scope and approach that will be used to complete an architecture development cycle.
Complete the sentence. Deliverable 2 is the ___, deliverable 4 is a deliverable from ___.
- A. Request for Architecture Work, Preliminary Phase
- B. Architecture Requirements Specification, Phase A
- C. Architecture Principles, Phase G
- D. Architecture Definition Document, Phase H
Answer: B
Explanation:
Architecture Requirements Specification: "provides a set of quantitative statements that outline what an implementation project must do in order to comply with the architecture." Open Group Publications Statement of Architecture Work (Phase A output): "The Statement of Architecture Work defines the scope and approach that will be used to complete an architecture project." (Produced in Phase A per the Phase A outputs list.) Open Group Publications References:- The Open Group White Paper, World-Class Enterprise Architecture: Framework Guidance and TOGAF 9 Example-Deliverables descriptions.- The Open Group, TOGAF 9 Conformance Requirements- Phase A outputs.
NEW QUESTION # 63
What is the purpose of the Preliminary Phase?
- A. Describing the target architecture.
- B. Identifying the stakeholders and their requirements.
- C. Developing an Enterprise Architecture Capability.
- D. Defining the Enterprise Strategy.
Answer: C
Explanation:
An Enterprise Architecture Capability is the ability of the organization to perform effective and efficient architecture work, including the definition, governance, and management of its architectures2. The Preliminary Phase involves the following activities1:
*Reviewing the organizational context, scope, and drivers for conducting Enterprise Architecture
*Establishing the Architecture Capability desired by the organization, including the maturity level, roles, responsibilities, processes, and tools
*Defining and establishing the Organizational Model for Enterprise Architecture, which describes how the architecture function is organized and integrated within the enterprise
*Defining and establishing the Architecture Governance framework, which provides the mechanisms for ensuring the quality, consistency, and compliance of the architecture work
*Selecting and implementing the tools that support the Architecture Capability, such as repositories, modeling tools, and communication tools
*Defining the Architecture Principles that will guide and constrain the architecture work, based on the business principles, goals, and drivers of the organization
*Defining the Organization-Specific Architecture Framework, which is an adaptation of the generic TOGAF ADM to suit the specific requirements, standards, and practices of the organization The Preliminary Phase is essential for preparing the organization for the successful development and implementation of its architectures, as well as for ensuring the alignment of the architecture work with the business strategy and objectives1.
NEW QUESTION # 64
Which of the following are the four purposes that typically frame the planning horizon, depth and breadth of an Architecture Project, and the contents of the EA Repository-?
- A. Strategy Portfolio Project Solution Delivery
- B. Segment, Capability. Enterprise and End-to-end Target Architecture
- C. Avant-Garde Big-Bang, Discreet and Cohesive
- D. General Foundational Subordinate and Superior Architecture
Answer: A
NEW QUESTION # 65
When considering Architecture Governance, what is the benefit that derives from discipline?
- A. All decision-making will be established so as to minimize conflicts of interest
- B. All parties will have a commitment to adhere to procedures and process
- C. Actions implemented and their decision support will be available for inspection
- D. Groups within the organization are accountable for their actions
Answer: B
Explanation:
TOGAF's governance guidance distinguishes benefits such as transparency, accountability, and discipline in operating governance processes. Formal TOGAF conformance topics include "The benefits of Architecture Governance," which include establishing and enforcing processes and controls (discipline) for architecture decision-making and compliance. togaf-cert.opengroup.org Reference: The Open Group, TOGAF Conformance Requirements (Multi-Level)-Unit on Architecture Governance (KLP 44.2-2 "The benefits of Architecture Governance").
NEW QUESTION # 66
Consider the following ADM phase objectives:
* Determine whether an incremental approach is required, and if so identify Transition Architectures that will deliver continuous business value
* Generate the initial complete version of the Architecture Roadmap, based upon the gap analysis and candidate Architecture Roadmap components from Phases B, C, and D
* Finalize the Architecture Roadmap and the supporting Implementation and Migration Plan
* Ensure that the business value and cost of work packages and Transition Architectures is understood by key stakeholdersWhich two are objectives of ADM Phase F?
- A. 1 & 2
- B. 2 & 3
- C. 1 & 3
- D. 3 & 4
Answer: D
Explanation:
Phase F: Migration Planning - Objectives/Outputs include:
"The outputs for this phase: ... Finalized Architecture Roadmap ... Implementation and Migration Plan
... projects assigned business value and risk."
"To prioritize all work packages... by assigning business value to each and conducting a cost/business analysis." Open Group Publications Reference: The Open Group, TOGAF 9 Conformance Requirements-Phase F learning objectives, outputs.
NEW QUESTION # 67
Complete the following sentence. In the ADM, documents which are under development and have not undergone any formal review and approval process are called______ Documents which have been reviewed and approved are called ______
- A. "concept" - "deliverable"
- B. "Version 0.1" - "Version 1.0"
- C. "draft"- "finalized"
- D. "draft" - "approved"
Answer: D
Explanation:
According to the TOGAF Standard, 10th Edition, documents which are under development and have not undergone any formal review and approval process are called draft documents, while documents which have been reviewed and approved are called approved documents 1. Draft documents are typically marked with a version number of 0.x, indicating that they are incomplete or provisional. Approved documents are typically marked with a version number of 1.0 or higher, indicating that they have been finalized and authorized. The other options are not correct, as they are not the terms used by the TOGAF Standard to distinguish between documents under development and documents that have been reviewed and approved. The terms "finalized", "concept", "deliverable", and "Version 0.1" and "Version 1.0" are not specific to the TOGAF Standard, and they may have different meanings or interpretations in different contexts. Reference: 1: TOGAF Standard, 10th Edition, Part II: Architecture Development Method, Chapter 7: Applying Iteration to the ADM, Section 7.2.3 Document Categorization.
NEW QUESTION # 68
What is an objective of the ADM Implementation Governance Phase?
- A. To provide continual monitoring of the governance framework
- B. To establish the resources for architecture governance
- C. To finalize the Implementation and Migration Plan
- D. To ensure conformance for the target architecture
Answer: D
Explanation:
The objective of the ADM Implementation Governance Phase is to provide an architectural oversight of the implementation and to ensure conformance for the target architecture. This phase involves establishing procedures and processes to monitor and control the implementation projects and to verify that they comply with the defined architecture. Reference: The TOGAF Standard | The Open Group Website, Section 3.2.7 Phase G: Implementation Governance.
NEW QUESTION # 69
......
The Open Group Exam 2026 OGEA-101 Dumps Updated Questions: https://www.dumpsmaterials.com/OGEA-101-real-torrent.html
Free UPDATED The Open Group OGEA-101 Certification Exam Dumps is Online: https://drive.google.com/open?id=1oaygNliISg3DHhEnYWZrwoU1gotWDb9P
