Network Appliance NS0-175 Exam Info and Free Practice Test DumpsMaterials [Q63-Q88] | DumpsMaterials

Network Appliance NS0-175 Exam Info and Free Practice Test DumpsMaterials [Q63-Q88]

Share

Network Appliance NS0-175 Exam Info and Free Practice Test | DumpsMaterials

Pass Network Appliance NS0-175 Premium Files Test Engine pdf - Free Dumps Collection


Network Appliance NS0-175 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Describe the storage components supported in FlexPod
  • FlexPod Configuration
  • FlexPod Design
Topic 2
  • Describe FlexPod management applications
  • Describe the main FlexPod components
Topic 3
  • Demonstrate how to perform FlexPod troubleshooting
  • FlexPod Troubleshooting
Topic 4
  • Describe how to install and configure the FlexPod components
  • Describe the compute components supported in FlexPod
Topic 5
  • Describe how to configure neworks in a UCS solution
  • Information Gathering for FlexPod Solutions
Topic 6
  • Demonstrate knowledge of how to administer FlexPod solutions according to FlexPod best practices
  • Describe the networking components supported in FlexPod
Topic 7
  • Describe how to configure SAN boot in a FlexPod solution
  • FlexPod Administration
Topic 8
  • Demonstrate knowledge of how to configure storage in a FlexPod solution
  • Demonstrate knowledge of how to install and upgrade the FlexPod solution
Topic 9
  • Demonstrate knowledge of how to configure Cisco Nexus switches
  • Describe knowledge of how to configure a service profile

 

NEW QUESTION 63
All of the following are supported interface types EXCEPT _______.

  • A. ATM
  • B. Gigabit Ethernet, fiber
  • C. 10/100 Ethernet
  • D. Gigabit Ethernet, copper

Answer: A

 

NEW QUESTION 64
For which of the following would the "NTLM Cache" feature normally be used?

  • A. Enables cached objects retrieved as the result of a successful NTLM exchange to be served to new users without requiring authentication.
  • B. Enables the caching and reuse of NTLM challenges in order to reduce the processing load on the domain controller.
  • C. Enables NetCache to cache NTLM-authenticated objects.
  • D. Enables NetCache to authenticate users using NTLM.

Answer: B

 

NEW QUESTION 65
You are designing a multi-site FlexPod Datacenter solution for a customer using MetroCluster over IP. The design should include a single set of compliant switches for the environment.
Which two features are required to satisfy this requirement? (Choose two.)

  • A. support for an MTU size of 9216
  • B. support for Fibre Channel ports
  • C. support for QoS
  • D. support for unified switch ports

Answer: B,C

 

NEW QUESTION 66
Which protocol is currently supported on the Nexus 1000V to support network isolation among virtual machines beyond traditional VLANs for cloud-scale networking?

  • A. Stateless Transport Tunneling (STT)
  • B. Virtual Extensible Local Area Network (VXLAN)
  • C. Overlay Transport Virtualization (OTV)
  • D. vPath

Answer: B

 

NEW QUESTION 67
You are designing a new bare metal FlexPod solution for an Oracle RAC environment and want to leverage online resources to ensure your overall design is following FlexPod design best practices.
In this scenario, which validated resource would you use for your design?

  • A. Cisco Validated Design document for Oracle RAC
  • B. Oracle Design Considerations for Oracle RAC
  • C. NetApp Interoperability Matrix Tool
  • D. VMware Deployment Guide for Oracle Database

Answer: B

 

NEW QUESTION 68
The console password can only be changed via ____.

  • A. the console
  • B. floppy disk
  • C. rsh
  • D. the Appliance Manager

Answer: A

 

NEW QUESTION 69
You are working with a customer on a new FlexPod solution. The customer advises you that they want a single point of contact for support issues.
In this scenario, which two support solutions should you offer the customer? (Choose two.)

  • A. Cisco Solution Support
  • B. NetApp SupportEdge Expert
  • C. NetApp Solution Support for FlexPod
  • D. Cisco SmartNet Total Care

Answer: C,D

 

NEW QUESTION 70
Your customer has a FlexPod configuration with a 4-node NetApp AFF A300 storage cluster that uses only NSE drives.
Which two solutions allow the customer to expand the current storage system? (Choose two.)

  • A. a two-node AFF A200 with a 3.8 TB NSE SSD
  • B. a two-node FAS8200 with a 4 TB NL-SAS HDD
  • C. a DS4246 with twenty-four 6 TB NL-SAS HDDs
  • D. a DS224C with twenty-four 3.8 TB SSDs

Answer: B,D

 

NEW QUESTION 71
One of the below object types cannot run a cache, which one is it?

  • A. VOD MPEG4 Streams
  • B. VOD MMS Streams
  • C. DNS A records
  • D. HTTP 200 OK responses

Answer: A

 

NEW QUESTION 72
When configuring a volume to contain a LUN, which administrative tool automatically applies NetApp recommendations?

  • A. VMware vSphere
  • B. Microsoft SystemCenter
  • C. Data ONTAP command-line interface
  • D. OnCommand System Manager

Answer: D

 

NEW QUESTION 73
One of the below ACLs will OK the requests from Engineering groups to www.netapp.com, which one could it be?

  • A. allow group "engineering" and server-name www.netapp.com
  • B. allow groupname "engineering" and server-name matches "\.netapp\.com$"
  • C. allow groupname "engineering" and server-name www.netapp.com
  • D. allow group "engineering" and server-domain www.netapp.com

Answer: A

 

NEW QUESTION 74
Which of the following tools is designed to inventory existing VMware vSphere, Linux, and Microsoft Windows Server versions in a customer environment?

  • A. Cisco UCS Central
  • B. Cisco UCS Sizer for Enterprise Applications
  • C. Microsoft Assessment and Planning (MAP) Toolkit
  • D. Cisco Resource Comparison Tool

Answer: C

 

NEW QUESTION 75
A customer must connect a VMFS datastore for a virtualized application.
Which type of connection should be configured in this scenario?

  • A. Microsoft iSCSI Host Initiator
  • B. OpenStack Block Storage Service
  • C. NFS VMkernel port
  • D. iSCSI VMkernel port

Answer: A

 

NEW QUESTION 76
A customer has a workload that requires an extremely dense deployment of CPU cores. For this workload, they have chosen to deploy servers that use AMD EPYC processors.
Which Cisco UCS server product would you use to satisfy this workload demand?

  • A. Cisco UCS B200 M5
  • B. Cisco UCS C125 M5
  • C. Cisco UCS B480 M5
  • D. Cisco UCS C240 M5

Answer: B

 

NEW QUESTION 77
You want to ensure minimal disruption to the UCS fabric in the case of a port failure between the blade chassis and the Fabric Interconnects of your FlexPod configuration.
Which industry best practice would you implement as a global configuration to accomplish this task?

  • A. Configure the chassis/FEX discovery policy to use N+1 mode.
  • B. Leave the chassis/FEX discovery policy in the default configuration.
  • C. Configure the chassis/FEX discovery policy to use Port Channel mode.
  • D. Configure the chassis/FEX discovery policy to use Discrete mode.

Answer: A

 

NEW QUESTION 78
State whether the following statement is true or false. All NetApp Services do not include System Administration Services.

  • A. False
  • B. True

Answer: B

 

NEW QUESTION 79
Which three statements are true about a NetApp Storage Virtual Machine? (Choose three.)

  • A. iSCSI, FC, and FCoE are all supported block protocols for Storage Virtual Machines.
  • B. Storage Virtual Machines must use either local authentication or Active Directory Authentication for user access and roles.
  • C. Multiple volumes from within a Storage Virtual Machine can be combined v to form a single NAS namespace.
  • D. A Storage Virtual Machine is a logical construct that represents a set of physical resources of the cluster and owns resources only from its designated HA controller pair.
  • E. A Storage Virtual Machine is only aware of the resources assigned to it se and has no knowledge of other Storage Virtual Machines and their respective resources.

Answer: A,B,D

 

NEW QUESTION 80
Which statement is true about the capabilities of Cisco UCS Manager?

  • A. It provides policy-driven management to programmatically control server, network, and storage resources.
  • B. It uses only manual discovery to detect, inventory, manage, and provision system components.
  • C. It manages servers up to 50 blades per UCS domain.
  • D. It supports Cisco UCS B-Series blades and not C-Series rack servers.

Answer: D

 

NEW QUESTION 81
When using Virtual Port Channel (vPC) on a Nexus 5500 switch, what protocol is responsible for synchronization of configuration, spanning tree, MAC and VLAN information?

  • A. Cisco Fabric Services over Ethernet (CFSoE)
  • B. LACP
  • C. Fibre Channel over Ethernet (FCoE)
  • D. Spanning Tree Protocol (STP)

Answer: A

 

NEW QUESTION 82
You are configuring Cisco UCS servers for FC SAN boot and want to perform zoning on your Cisco Nexus 5000 series switches.
In this scenario, which statement is correct?

  • A. SAN links are required between the Cisco Fabric Interconnects and the Nexus 5000 switches.
  • B. FC zoning on the Nexus series switches is not supported; zoning can be done only on the Cisco Fabric Interconnects.
  • C. The corresponding FC ports on your NetApp storage array must be configured in LACP mode.
  • D. An iSCSI license on the NetApp storage controller is required.

Answer: B

 

NEW QUESTION 83
An administrator is designing a FlexPod with the Nexus 5548UP series switches to SAN boot all of the ESXi hosts over FCoE, and attach to the VM datastores over NFS.
In this scenario, which license will be required on the Nexus switches?

  • A. Storage Protocols Package
  • B. FCoE NPV Package
  • C. Network Services Package
  • D. FabricPath Services Package

Answer: A

 

NEW QUESTION 84
Product documentation is available on the appliance and at ______

  • A. ftp.netapp.com
  • B. www.netapp.com
  • C. now.netapp.com
  • D. documentation.netapp.com

Answer: C

 

NEW QUESTION 85
You want to provision and back up storage for specific applications in your NetApp FAS environment. You decide to use NetApp Snapshot copies for application-consistent backups.

  • A. NetApp SnapVault and NetApp SnapManager
  • B. NetApp SnapDrive and NetApp SnapMirror
  • C. NetApp SnapDrive and NetApp SnapManager
  • D. NetApp Provisioning Manager and NetApp Snap Creator

Answer: A

 

NEW QUESTION 86
You have taken over management of an existing FlexPod system as part of a new job role. You want to find details of existing support and service contracts available for the system.
Which two resources would you use to find this information? (Choose two.)

  • A. FlexPod.com website
  • B. NetApp Interoperability Matrix Tool
  • C. Cisco Device Coverage Checker Tool
  • D. NetApp Support website

Answer: B,D

 

NEW QUESTION 87
A storage architect wants to replace a NetApp 7-mode system with a new NetApp clustered Data ONTAP system.
What are two new features available with this upgrade? (Choose two.)

  • A. namespace
  • B. SnapMirror
  • C. SnapProtect
  • D. junction paths

Answer: C,D

 

NEW QUESTION 88
......

Updated Official licence for NS0-175 Certified by NS0-175 Dumps PDF: https://www.dumpsmaterials.com/NS0-175-real-torrent.html