Latest [Mar 01, 2023] Juniper JN0-636 Real Exam Dumps PDF
JN0-636 Practice Test Questions Updated 94 Questions
Juniper JN0-636 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 44
Exhibit
Which two statements are correct about the output shown in the exhibit. (Choose two.)
- A. The destination address is translated.
- B. The source address is translated.
- C. The packet is an SSH packet
- D. The packet matches a user-configured policy
Answer: B,C
NEW QUESTION 45
You want to enforce I DP policies on HTTP traffic.
In this scenario, which two actions must be performed on your SRX Series device? (Choose two )
- A. Specify an action of None.
- B. Disable screen options on the Untrust zone.
- C. Match on application junos-http.
- D. Choose an attacks type in the predefined-attacks-group HTTP-All.
Answer: A,C
NEW QUESTION 46
Exhibit
Referring to the exhibit, which two statements are true about the CAK status for the CAK named "FFFP"?
(Choose two.)
- A. SAK is not generated using this key.
- B. CAK is not used for encryption and decryption of the MACsec session.
- C. CAK is used for encryption and decryption of the MACsec session.
- D. SAK is successfully generated using this key.
Answer: A,C
NEW QUESTION 47
Exhibit
You are using traceoptions to verify NAT session information on your SRX Series device. Referring to the exhibit, which two statements are correct? (Choose two.)
- A. This is the last packet in the session.
- B. The SRX Series device is performing only source NAT on this session.
- C. The SRX Series device is performing both source and destination NAT on this session.
- D. This is the first packet in the session.
Answer: A,C
NEW QUESTION 48
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The configured solution allows IPv6 to IPv4 translation.
- B. External hosts cannot initiate contact.
- C. The configured solution allows IPv4 to IPv6 translation.
- D. The IPv6 address is invalid.
Answer: A,D
NEW QUESTION 49
Exhibit
You are implementing filter-based forwarding to send traffic from the 172.25.0.0/24 network through ISP-1 while sending all other traffic through your connection to ISP-2. Your ge-0/0/1 interface connects to two networks, including the 172.25.0.0/24 network. You have implemented the configuration shown in the exhibit.
The traffic from the 172.25.0.0/24 network is being forwarded as expected to 172.20.0.2, however traffic from the other network (172.25.1.0/24) is not being forwarded to the upstream 172.21.0.2 neighbor.
In this scenario, which action will solve this problem?
- A. You must specify that the 172.25.1.1/24 IP address is the primary address on the ge-0/0/1 interface.
- B. You must apply the firewall filter to the lo0 interface when using filter-based forwarding.
- C. You must create the static default route to neighbor 172.21 0.2 under the ISP-1 routing instance hierarchy.
- D. You must add another term to the firewall filter to accept the traffic from the 172.25.1.0/24 network.
Answer: C
NEW QUESTION 50
Exhibit
Referring to the exhibit, which three statements are true? (Choose three.)
- A. The packet is dropped before making an SSH connection.
- B. The packet originated within the Trust zone.
- C. The packet is allowed to make an SSH connection.
- D. The packet's destination is to a server in the DMZ zone.
- E. The packet's destination is to an interface on the SRX Series device.
Answer: A,B,E
NEW QUESTION 51
Exhibit
You are implementing filter-based forwarding to send traffic from the 172.25.0.0/24 network through ISP-1 while sending all other traffic through your connection to ISP-2. Your ge-0/0/1 interface connects to two networks, including the 172.25.0.0/24 network. You have implemented the configuration shown in the exhibit. The traffic from the 172.25.0.0/24 network is being forwarded as expected to 172.20.0.2, however traffic from the other network (172.25.1.0/24) is not being forwarded to the upstream 172.21.0.2 neighbor.
In this scenario, which action will solve this problem?
- A. You must specify that the 172.25.1.1/24 IP address is the primary address on the ge-0/0/1 interface.
- B. You must apply the firewall filter to the lo0 interface when using filter-based forwarding.
- C. You must create the static default route to neighbor 172.21 0.2 under the ISP-1 routing instance hierarchy.
- D. You must add another term to the firewall filter to accept the traffic from the 172.25.1.0/24 network.
Answer: C
NEW QUESTION 52
Exhibit
You are using ATP Cloud and notice that there is a host with a high number of ETI and C&C hits sourced from the same investigation and notice that some of the events have not been automatically mitigated.
Referring to the exhibit, what is a reason for this behavior?
- A. The infected host score is globally set bellow a threat level of 5.
- B. The C&C events are false positives.
- C. The infected host score is globally set above a threat level of 5.
- D. The ETI events are false positives.
Answer: D
NEW QUESTION 53
Click the Exhibit button.
When attempting to enroll an SRX Series device to JATP, you receive the error shown in the exhibit. What is the cause of the error?
- A. A firewall is blocking HTTPS on fxp0
- B. The fxp0 IP address is not routable
- C. The SRX Series device does not have an IP address assigned to the interface that accesses JATP
- D. The SRX Series device certificate does not match the JATP certificate
Answer: C
NEW QUESTION 54
Your Source NAT implementation uses an address pool that contains multiple IPv4 addresses Your users report that when they establish more than one session with an external application, they are prompted to authenticate multiple times External hosts must not be able to establish sessions with internal network hosts What will solve this problem?
- A. Enable destination NAT.
- B. Enable address persistence.
- C. Enable persistent NAT
- D. Disable PAT.
Answer: C
NEW QUESTION 55
Exhibit
The show network-access aaa radius-servers command has been issued to solve authentication issues.
Referring to the exhibit, to which two authentication servers will the SRX Series device continue to send requests? (ChooseTWO)
- A. 192.168.30.190
- B. 192.168.30.191
- C. 192.168.30.188
- D. 200l:DB8:0:f101;:2
Answer: B,C
NEW QUESTION 56
To analyze and detect malware, Juniper ATP Cloud performs which two functions? (Choose two.)
- A. cache lookup: to see if the file is seen already and known to be malicious
- B. antivirus scan: with a single vendor solution to see if the file contains any potential threats
- C. static analysis: to see what happens if you execute the file in a real environment
- D. dynamic analysis: to see what happens if you execute the file in a real environment
Answer: B,C
NEW QUESTION 57
You have the NAT rule, shown in the exhibit, applied to allow communication across an IPsec tunnel between your two sites with identical networks. Which statement is correct in this scenario?
- A. The NAT rule in applied to the N/A routing instance.
- B. The NAT rule with translate the source and destination addresses.
- C. The NAT rule will only translate two addresses at a time.
- D. 10 packets have been processed by the NAT rule.
Answer: B
NEW QUESTION 58
Exhibit
Referring to the exhibit, which statement is true?
- A. This custom block list feed will be used before the Juniper Seclntel
- B. This custom block list feed will be used after the Juniper Seclntel block list feed.
- C. This custom block list feed cannot be saved if the Juniper Seclntel block list feed is configured.
- D. This custom block list feed will be used instead of the Juniper Seclntel block list feed
Answer: B
NEW QUESTION 59
Which two modes are supported on Juniper ATP Cloud? (Choose two.)
- A. private mode
- B. transparent mode
- C. global mode
- D. Layer 3 mode
Answer: B,D
NEW QUESTION 60
You are asked to determine if the 203.0.113.5 IP address has been added to the third-party security feed, DS hield, from Juniper Seclnte1. You have an SRX Series device that is using Seclnte1 feeds from Juniper ATP Cloud Which command will return this information?
- A. show security dynamic-address category-name Infected-Hosts | match 203.0.113.5
- B. show security dynamic-address category-name IPFilter I match 203.0.113.5
- C. show Security dynamic-address category-name JWAS | match 203.0.113.5
- D. show security dynamic-address category-name CC | match 203.0.113.5
Answer: C
NEW QUESTION 61
You are asked to detect domain generation algorithms
Which two steps will accomplish this goal on an SRX Series firewall? (Choose two.)
- A. Define a security-metadata-streaming policy under [edit
- B. Attach the advanced-anti-malware policy to a security policy.
- C. Define an advanced-anti-malware policy under [edit services].
- D. Attach the security-metadata-streaming policy to a security
Answer: B,C
NEW QUESTION 62
Exhibit
Referring to the exhibit, which two statements are true? (Choose two.)
- A. You can use the Proxy_Nodes feed as the source-address and destination-address match criteria of another security policy on a different SRX Series device.
- B. The SRX-1 device can use the Proxy__Nodes feed in another security policy.
- C. You can only use the Proxy_Node3 feed as the destination-address match criteria of another security policy on a different SRX Series device.
- D. The SRX-1 device creates the Proxy_wodes feed, so it cannot use it in another security policy.
Answer: B,D
NEW QUESTION 63
Exhibit.
A hub member of an ADVPN is not functioning correctly.
Referring the exhibit, which action should you take to solve the problem?
- A. [edit interfaces]
user@hub-1# delete ipsec vpn advpn-vpn traffic-selector - B. [edit security]
user@hub-1# delete ike gateway advpn-gateway advpn partner - C. [edit interfaces]
root@vSRX-1# delete st0.0 multipoint - D. [edit security]
user@hub-1# set ike gateway advpn-gateway advpn suggester disable
Answer: A
NEW QUESTION 64
Exhibit
You have configured the SRX Series device to switch packets for multiple directly connected hosts that are within the same broadcast domain However, the traffic between two hosts in the same broadcast domain are not matching any security policies Referring to the exhibit, what should you do to solve this problem?
- A. You must change the global mode to security bridging mode
- B. You must change the global mode to switching mode.
- C. You must change the global mode to transparent bridge mode.
- D. You must change the global mode to security switching mode.
Answer: A
NEW QUESTION 65
Exhibit.
Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
- A. [edit security ike gateway advpn-gateway]
user@srx# set version v1-only - B. [edit security ike gateway advpn-gateway]
user@srx# delete advpn partner - C. [edit interfaces]
user@srx# delete st0.0 multipoint - D. [edit security ike gateway advpn-gateway]
user@srx# set advpn suggester disable
Answer: B,D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-auto-discovery-vpns.html
NEW QUESTION 66
......
Juniper JN0-636 Dumps - Secret To Pass in First Attempt: https://www.dumpsmaterials.com/JN0-636-real-torrent.html
JN0-636 Dumps - Grab Out For [NEW-2023] Juniper Exam: https://drive.google.com/open?id=1c_j8th7XDoJCM9MYhu834c4EWhWeS13_
