[Feb 01, 2022] Valid 300-425 Test Answers & 300-425 Exam PDF
Valid CCNP Enterprise 300-425 Dumps Ensure Your Passing
NEW QUESTION 40
An engineer is designing a wireless network to support nigh availability. The network will need to support the total number of APs and client SSO. Live services should continue to work without interruption during the failover. Which two requirements need to be incorporated into the design to meet these needs? (Choose two)
- A. WLC 7.5 code or more recent
- B. redundant vWLC
- C. back-to-back direct connection between WLCs
- D. controller high availability pair with one of the WLCs having a valid AP count license
- E. 10 sec RTT
Answer: C,D
NEW QUESTION 41
An engineer must create data link redundancy for the company's Cisco Wireless LAN controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)
- A. Full bandwidth of all links is available.
- B. Interface connection to two separate nonstacked switches is available.
- C. Ports are grouped into multiple LAGs.
- D. The same port has multiple untagged dynamic interfaces.
- E. Packets are always sent out on the same port they are received on.
- F. All interface traffic passes as long as one port is up.
Answer: C,E,F
Explanation:
https://community.cisco.com/t5/wireless-mobility-documents/lag-link-aggregation/ta-p/3128669
NEW QUESTION 42
Where must the APs be mounted when used in a high-density wireless network to provide 6 dB to 20 dB of attenuation to a cell?
- A. under the stage
- B. under the seat
- C. in the aisle
- D. above the stage
Answer: B
Explanation:
NEW QUESTION 43
How does AP failover priority for access points function when configured with priority 1 or 4?
- A. When configured with priority 4, the access point is assigned with the lowest priority level and it is marked as low. This access point fails over after other access points with the higher priority when there is primary controller failure.
- B. When configured with priority 1, the access point is assigned with the medium priority level and it is marked as medium. This access point fails over after other access points with the higher priority when there is primary controller failure.
- C. When configured with priority 1, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.
- D. When configured with priority 4, the access point is assigned with the highest priority level and it is marked as critical. This access point fails over before other access points with the lower priority when there is primary controller failure.
Answer: D
NEW QUESTION 44
During a post-deployment site Survey, issues are found with non wi-Fi interference. What should the engineer use to identify the source of the Interference?
- A. Cisco spectrum expert
- B. Wireshark
- C. Network analysis module
- D. Wireless intrusion prevention
Answer: A
NEW QUESTION 45
What causes the most signal attenuation, based on the wireless design tools?
- A. metal door
- B. office window
- C. glass wall
- D. cinder block wall
Answer: A
Explanation:
NEW QUESTION 46
An engineer must ensure that the wireless network can accomplish fast secure roaming by way of caching keys on the access points. Which key caching mechanism is enabled by default on a Cisco AireOS WLC?
- A. OKC
- B. CCKM
- C. 802.11r
- D. SKC
Answer: A
Explanation:
NEW QUESTION 47
Which statement about the 9800 Series Wireless Controller mobility tunnel on a Cisco Catalyst 9800 controller is true?
- A. It is an IPsec tunnel with control path only.
- B. It is a CAPWAP tunnel with control path and data path.
- C. It is a CAPWAP tunnel with data path only.
- D. It is an IPsec tunnel with control path and data path.
Answer: B
Explanation:
NEW QUESTION 48
A wireless engineer is designing a wireless network to support real-time applications over wireless. Which IEEE protocol mus the engineer enable on the WLC so that the number of packets that are exchanged between an access point and client are reduced and fast roaming occurs?
- A. 802.11i
- B. 802.11k
- C. 802.11w
- D. 802.11r
Answer: B
NEW QUESTION 49
An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol. Which protocol must the engineer selects?
- A. 802.11i
- B. 802.11ac
- C. 802.11r
- D. 802.11e
Answer: C
Explanation:
NEW QUESTION 50
A customer has noticed that Client Band Select is enabled and no clients are utilizing the 5 GHz band. Which three parameters must be met to ensure that wireless clients use the 5 GHz band? (Choose three.)
- A. Ensure that the UNII-2 extended channels are enabled on the 802.11a radios.
- B. Ensure that the client is receiving RSSI above the minimum band select RSSI threshold.
- C. Ensure that the WLAN has 802.11a enabled.
- D. Ensure that the client is dual-band capable.
- E. Ensure that the co-channel interference has not exceeded −85 dBm.
- F. Ensure that channel bonding is enabled on the WLAN.
Answer: A,B,D
Explanation:
Section: Wired and Wireless Infrastructure
NEW QUESTION 51
A customer has noticed that Client Band Select is enabled and no clients are utilizing the 5 GHz band. Which three parameters must be met to ensure that wireless clients use the 5 GHz band? (Choose three.)
- A. Ensure that the UNII-2 extended channels are enabled on the 802.11a radios.
- B. Ensure that the client is receiving RSSI above the minimum band select RSSI threshold.
- C. Ensure that the WLAN has 802.11a enabled.
- D. Ensure that the co-channel interference has not exceeded -85 dBm.
- E. Ensure that the client is dual-band capable.
- F. Ensure that channel bonding is enabled on the WLAN.
Answer: A,C,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob41dg/emob41dg-wrapper/ch3_WLAN
NEW QUESTION 52
Which statement about creating a mobility group is true, excluding mobility anchors?
- A. Each WLC must use the same mobility name and be defined as a peer in each other's static mobility members list.
- B. A mobility groups does not require all WLCs in the group to use the same virtual IP address.
- C. If WLCs with HA SSO are deployed, each WLC in the WLC HA pair considered separately as a mobility peer.
- D. The WLCs do not have to be of the same model or type to be a member of a mobility group, however each member should be running different software versions.
Answer: C
Explanation:
NEW QUESTION 53
How should the concept of mobility domains and mobility groups be explained to a customer?
- A. If WLCs are in the same mobility domain, they communicate with each other but. if an anchor WLC ® present, it must: be in the same mobility domain for communication to be possible.
- B. if WLCs are in same mobility domain, they communicate with each other. Mobility groups constrain the distribution of security context of a client and also constrain AP fail-over between controllers.
- C. WLCs do not need to be in the same mobility domain to communicate with each other Mobility groups constrain the distribution of security context of a client and also constrain AP fail-over between controllers.
- D. A mobility group does not constrain the distribution of security context of a client and also does not constrain AP fail-over between controllers when the WLCs are in the same mobility domain.
Answer: B
NEW QUESTION 54
An engineer must ensure that the wireless network can accomplish fast secure roaming by way of caching keys on the access points. Which key caching mechanism is enabled by default on a Cisco AireOS WLC?
- A. OKC
- B. CCKM
- C. 802.11r
- D. SKC
Answer: A
Explanation:
NEW QUESTION 55
......
What are the Benefits of the Cisco 300-425 Certification Exam
The individuals who have obtained their CCENT certification will have an edge over their counterparts in IT jobs. Employers will consider the CCENT certification as a filter for potential candidates. One of the advantages of earning a Cisco Certified Entry Network Technician (CCENT) certification is that it is recognized by many companies including Cisco and Microsoft. As a result, the certification can boost your career opportunities in IT since it is one of the most sought-after certifications by employers. The exam has been designed to evaluate your ability to perform all the tasks associated with being a network engineer. As a result, the certification is as valuable as the Cisco CCNA R&S certification. Individuals who have obtained the CCENT certification are also qualified to pursue more advanced certifications such as the Network
Cisco 300-425 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
300-425 Dumps Real Exam Questions Test Engine Dumps Training: https://www.dumpsmaterials.com/300-425-real-torrent.html
300-425 exam dumps and online Test Engine: https://drive.google.com/open?id=1CxYxvL6DhBvMZvv7hoUDtQ6ofIbHYtPV
