EX200 Dumps for Pass Guaranteed - Pass EX200 Exam 2024
EX200 Exam Dumps - Try Best EX200 Exam Questions from Training Expert DumpsMaterials
To take the RHCSA exam, candidates must have a good understanding of Linux administration and basic command-line skills. They should also have experience working with Red Hat Enterprise Linux or other Linux distributions. EX200 exam covers a wide range of topics such as system administration, network management, security, and troubleshooting.
NEW QUESTION # 54
Add a new logical partition having size 100MB and create the data which will be the mount point for the new partition.
Answer:
Explanation:
see explanation below.
Explanation
1. Use fdisk /dev/hda-> To create new partition.
2. Type n ->For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Keys
5. Type the size: +100M you can specify either Last cylinder of size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
OR
1. mke2fs -j /dev/hda? ->To create ext3 filesystem.
2. vi /etc/fstab
3. Write:
/dev/hda? /data ext3 defaults 0 0
4. Verify by mounting on current sessions also:
mount /dev/hda? /data
NEW QUESTION # 55
Your System is going to use as a Router for two networks. One Network is 192.168.0.0/24 and Another Network is 192.168.1.0/24. Both network's IP address has assigned. How will you forward the packets from one network to another network?
Answer:
Explanation:
echo "1" >/proc/sys/net/ipv4/ip_forward
vi /etc/sysctl.conf
net.ipv4.ip_forward = 1
If you want to use the Linux System as a Router to make communication between different networks, you need enable the IP forwarding. To enable on running session just set value 1 to
/proc/sys/net/ipv4/ip_forward. As well as automatically turn on the IP forwarding features on next boot set on /etc/sysctl.conf file.
NEW QUESTION # 56
Configure your web services, download from http://instructor.example.com/pub/serverX.html And the services must be still running after system rebooting.
Answer:
Explanation:
cd /var/www/html
wget http://instructor.example.com/pub/serverX.html mv serverX.html index.html /etc/init.d/httpd restart chkconfig httpd on
NEW QUESTION # 57
Download the document from ftp://instructor.example.com/pub/testfile, find all lines containing [abcde] and redirect to /MNT/answer document, then rearrange the order according the original content.
Answer:
Explanation:
Download the file to /tmp first
grep [abcde] /tmp/testfile > /mnt/answer
NEW QUESTION # 58
Find the rows that contain abcde from file /etc/testfile, and write it to the file/tmp/testfile, and the sequence is requested as the same as /etc/testfile.
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# cat /etc/testfile | while read line;
do
echo $line | grep abcde | tee -a /tmp/testfile
done
OR
grep `abcde' /etc/testfile > /tmp/testfile
NEW QUESTION # 59
CORRECT TEXT
Create a volume group,and set 8M as a extends. Divided a volume group containing 50 extends on volume group lv (lvshare), make it as ext4 file system, and mounted automatically under /mnt/data. And the size of the floating range should set between 380M and 400M.
Answer:
Explanation:
# fdisk
# partprobe
# pvcreate /dev/vda6
# vgcreate -s 8M vg1 /dev/vda6 -s
# lvcreate -n lvshare -l 50 vg1 -l
# mkfs.ext4 /dev/vg1/lvshare
# mkdir -p /mnt/data
# vim /etc/fstab
/dev/vg1/lvshare /mnt/data ext4 defaults 0 0
# mount -a
# df -h
NEW QUESTION # 60
Configure a task: plan to run echo "file" command at 14:23 every day.
Answer:
Explanation:
see explanation below.
Explanation
(a) Created as administrator
# crontab -u natasha -e
23 14 * * * /bin/echo "file"
(b)Created as natasha
# su - natasha
$ crontab -e
23 14 * * * /bin/echo "file"
NEW QUESTION # 61
Successfully resolve to server1.example.com where your DNS server is 172.24.254.254.
Answer:
Explanation:
see explanation below.
Explanation
* vi /etc/resolv.conf
nameserver 172.24.254.254
* host server1.example.com
On every clients, DNS server is specified in /etc/resolv.conf. When you request by name it tries to resolv from DNS server.
NEW QUESTION # 62
/data Directory is shared from the server1.example.com server. Mount the shared directory that:
- A. when user doesn't use mounted directory should unmount automatically after 50 seconds.
- B. shared directory should mount on /mnt/data on your machine.
- C. when user try to access, automatically should mount
Answer: C
Explanation:
1. vi /etc/auto.master
/mnt /etc /auto.misc --timeout=50
vi /etc/auto.misc
data -rw,soft,intr server1.example.com:/data
service autofs restart
chkconfig autofs on
When you mount the other filesystem, you should unmount the mounted filesystem, Automount feature of linux helps to mount at access time and after certain seconds, when user unaccess the mounted directory, automatically unmount the filesystem.
/etc/auto.master is the master configuration file for autofs service. When you start the service, it reads the mount point as defined in /etc/auto.master.
NEW QUESTION # 63
Configure the system synchronous as 172.24.40.10.
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
Graphical Interfaces:
System-->Administration-->Date & Time
OR
# system-config-date
NEW QUESTION # 64
Add users: user2, user3.
The Additional group of the two users: user2, user3 is the admin group Password: redhat
Answer:
Explanation:
# useradd -G admin user2
# useradd -G admin user3
# passwd user2
redhat
# passwd user3
redhat
NEW QUESTION # 65
1. Find all sizes of 10k file or directory under the /etc directory, and copy to /tmp/findfiles directory.
2. Find all the files or directories with Lucy as the owner, and copy to /tmp/findfiles directory.
Answer:
Explanation:
(1)find /etc -size 10k -exec cp {} /tmp/findfiles \;
(2)find / -user lucy -exec cp -a {} /tmp/findfiles \;
Note: If find users and permissions, you need to use cp - a options, to keep file permissions and user attributes etc.
NEW QUESTION # 66
Configure /var/tmp/fstab Permission.
Copy the file /etc/fstab to /var/tmp/fstab. Configure var/tmp/fstab permissions as the following:
Owner of the file /var/tmp/fstab is Root, belongs to group root
File /var/tmp/fstab cannot be executed by any user
User natasha can read and write /var/tmp/fstab
User harry cannot read and write /var/tmp/fstab
All other users (present and future) can read var/tmp/fstab.
Answer:
Explanation:
see explanation below.
Explanation
cp /etc/fstab /var/tmp/
* /var/tmp/fstab view the owner setfacl -m u:natasha:rw- /var/tmp/fstab setfacl -m u:haryy:---
/var/tmp/fstab
Use getfacl /var/tmp/fstab to view permissions
NEW QUESTION # 67
CORRECT TEXT
Add 3 users: harry, natasha, tom.
The requirements: The Additional group of the two users: harry, Natasha is the admin group. The
user: tom's login shell should be non-interactive.
Answer:
Explanation:
# useradd -G admin harry
# useradd -G admin natasha
# useradd -s /sbin/nologin tom
# id harry;id Natasha (Show additional group)
# cat /etc/passwd
(Show the login shell)
OR
# system-config-users
NEW QUESTION # 68
Binding to an external validation server.
System server.domain11.example.com provides a LDAP validation service, your system should bind to this service as required:
Base DN of validation service is dc=example,dc=com
LDAP
is used for providing account information and validation information Connecting and using the certification of
http://server.domain11.example.com/pub/EXAMPLE-CA-CERT to encrypt
After the correct configuration, ldapuser1 can log into your system, it does not have HOME directory until you finish autofs questions, ldapuser1 password is password.
Answer:
Explanation:
see explanation below.
Explanation
yum -y install sssd authconfig-gtk krb5-workstation authconfig-gtk // open the graphical interface Modify user account database to ldap, fill up DN and LDAP SERVER as questions required, use TLS to encrypt connections making tick, write http://server.domain11.example.com/pub/EXAMPLE-CA-CERT to download ca, authentication method choose ldap password.
You can test if the ldapuser is added by the following command:
Id ldapuser1
Note: user password doesn't not need to set
NEW QUESTION # 69
Configure autofs to automount the home directories of LDAP users as follows:
host.domain11.example.com NFS-exports /home to your system.
This filesystem contains a pre-configured home directory for the user ldapuser11 ldapuser11's home directory is host.domain11.example.com /rhome/ldapuser11 ldapuser11's home directory should be automounted locally beneath /rhome as /rhome/ldapuser11 Home directories must be writable by their users ldapuser11's password is 'password'.
Answer:
Explanation:
vim /etc/auto.master /rhome /etc/auto.misc
wq!
# vim /etc/auto.misc
ldapuser11 --rw,sync host.domain11.example.com:/rhome/ldpauser11 :wq!
#service autofs restart
service autofs reload
chkconfig autofs on
su -ldapuser11
Login ldapuser with home directory
# exit
NEW QUESTION # 70
SIMULATION
User mary must configure a task.
Requirement: The local time at 14:23 every day echo "Hello World.".
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: crontab -u mary -e
23 14 * * * echo "Hello World."
NEW QUESTION # 71
Find the rows that contain abcde from file /etc/testfile, and write it to the file/tmp/testfile, and the sequence is requested as the same as /etc/testfile.
Answer:
Explanation:
# cat /etc/testfile | while read line;
do
echo $line | grep abcde | tee -a /tmp/testfile
done
OR
grep `abcde' /etc/testfile > /tmp/testfile
NEW QUESTION # 72
SIMULATION
Create the following users, groups, and group memberships:
A group named adminuser.
A user natasha who belongs to adminuser as a secondary group A user harry who also belongs to adminuser as a secondary group.
A user sarah who does not have access to an interactive shell on the system, and who is not a member of adminuser, natasha, harry, and sarah should all have the password of redhat.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
groupadd sysmgrs
useradd -G sysmgrs Natasha
We can verify the newly created user by cat /etc/passwd)
# useradd -G sysmgrs harry
# useradd -s /sbin/nologin sarrh
# passwd Natasha
# passwd harry
# passwd sarrah
NEW QUESTION # 73
How is cloud-init integrated with a managed system image?
- A. cloud-init provides its own startup mechanism which replaces the instance's original init system, such as
systemd. - B. cloud-init provides a Linux kernel module that must be included and loaded in the instance's initramfs.
- C. cloud-init provides the cloud-init-daemonservice which is launched during startup and keeps the
instance in sync with the desired configuration. - D. cloud-init provides the cloud-init-workercommand which has to be invoked periodically within the
running instance. - E. cloud-init provides systemd units which must be included in several stages of the booting process of the
instance.
Answer: B
NEW QUESTION # 74
SIMULATION
Install the Kernel Upgrade.
Install suitable kernel update from:
http://server.domain11.example.com/pub/updates.
Following requirements must be met:
Updated kernel used as the default kernel of system start-up.
The original kernel is still valid and can be guided when system starts up.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: Using the browser open the URL in the question, download kernel file to root or home directory.
uname -r// check the current kernel version
rpm -ivh kernel-*.rpm
vi /boot/grub.conf// check
Some questions are: Install and upgrade the kernel as required. To ensure that grub2 is the default item for startup.
Yum repo : http://content.example.com/rhel7.0/x86-64/errata
OR
uname -r // check kernel
Yum-config-manager --add-repo="http://content.example.com/rhel7.0/x86-64/ errata" Yum clean all Yum list kernel// install directly Yum -y install kernel// stuck with it, do not pipe! Please do not pipe!
Default enable new kernel grub2-editenv list// check
Modify grub2-set-default "kernel full name"
Grub2-mkconfig -o/boot/grub2/grub.cfg// Refresh
NEW QUESTION # 75
Configure the permissions of /var/tmp/fstab
Copy the file /etc/fstab to /var/tmp/fstab. Configure the permissions of /var/tmp/fstab so that:
the file /var/tmp/fstab is owned by the root user.
the file /var/tmp/fstab belongs to the group root.
the file /var/tmp/fstab should not be executable by anyone.
the user natasha is able to read and write /var/tmp/fstab.
the user harry can neither write nor read /var/tmp/fstab.
all other users (current or future) have the ability to read /var/tmp/fstab.
Answer:
Explanation:
see explanation below.
Explanation
* cp -a /etc/fstab /var/tmp
* cd /var/tmp
* ls -l
* getfacl /var/tmp/fstab
* chmod ugo-x /var/tmp/fstab
[ No need to do this, there won't be execute permission for the file by default]
# setfacl -m u:natasha:rw /var/tmp/fstab # setfacl -m u:harry:0 /var/tmp/fstab(zero)
[Read permission will be there for all the users, by default. Check it using ls -l /var/tmp/fstab] Verify by
[ ls -la /var/tmp/fstab]
NEW QUESTION # 76
......
RedHat EX200 exam is a four-hour exam that consists of multiple-choice questions and hands-on tasks. Candidates are required to perform a variety of tasks, including configuring network interfaces, managing storage devices, creating and managing users and groups, and configuring security settings. EX200 exam is designed to test the candidate's ability to perform these tasks efficiently and effectively in a real-world environment.
Remote connectivity
Remote connectivity is the ability to access information systems, including computers, servers, network devices, and operating systems. Remote connectivity opportunities presents a range of challenges that need to be considered. Workers in the healthcare industry must be able to communicate, collaborate, and coordinate in order to achieve their goals. You will need to perform diagnostics on remote systems when called for in order to meet your objectives. Rarely, if ever, will you be handed a completed system that is ready for deployment. You will need to understand the features and components that are required to complete various projects which are also covered in our Red Hat EX200 Dumps. The most important thing that you can do before you start practicing is finding out what areas of the exam you need more focus on. For example, if your salary depends on your experience, and you want to get an advance on your income, then work on being better at work in general. In practice exams, practitioners will get access to valid demo and a real guide to the Dumps. Policy also offers practice exams that are available in PDF format, however, they do not cover all the areas of exam Red Hat Certified Engineer Professional. For example, these PDFs do not test your theoretical knowledge of security.
Latest 100% Passing Guarantee - Brilliant EX200 Exam Questions PDF: https://www.dumpsmaterials.com/EX200-real-torrent.html
Practice Examples and Dumps & Tips for 2024 Latest EX200 Valid Tests Dumps: https://drive.google.com/open?id=1kncpmfP2c_jomKUulW7oCu6wK1n1ihch
