[2023] New OmniStudio-Developer exam dumps Use Updated Salesforce Exam
Verified OmniStudio-Developer Dumps Q&As - OmniStudio-Developer Test Engine with Correct Answers
NEW QUESTION 21
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.
How can the developer configure the FlexCard to display the case records in this way?
- A. Select the Repeatable Mode property on the data table elements
- B. Enable the record Looping feature on the data table elements
- C. Enable the Repeat Records feature on the FlexCard Setup tab
- D. Disable the Repeat Record feature on the FlexCard setup tab
Answer: D
NEW QUESTION 22
What is the merge code you need for this Integration Procedure structure to pass a CaseNumber node from the DataRaptor Extract Action Single Book (DRReadCase) to the HTTP Action's HTTP Path URL?
- A. HTTPGetCaseDetails: CaseNumber
- B. %DRReadCase:CaseNumber%
- C. {{DRReadCase. CaseNumber}}
- D. {{CaseNumben}
Answer: B
NEW QUESTION 23 
A)
B)
- A. Option A
- B. Option B
Answer: A
NEW QUESTION 24
A developer creates an Integration Procedure with a Set values and a DataRaptor Extract Action that requires Accountld as a key. When the developer previews the Integration Procedure, the developer enters the Accountld correctly and executes the preview. The developer sees the data extracted by the DataRaptor in the Debug Log, but the response is empty.
What is the likely cause of this issue?
- A. The DataRaptor Action did not have the Add Response To Response JSON property set to true.
- B. The Response cannot be previewed directly.
- C. A Response Action was not added to the Integration Procedure.
- D. The Accountld used for the preview is invalid.
Answer: C
NEW QUESTION 25
On a FlexCard canvas, several fields display with Salesforce data, but one of the fields shows only the label. What could cause this?
- A. There are No test Data test Parameters configured.
- B. In the FlexCard state, the Field type for the field does not match the type in the Salesforce record.
- C. The field name in the FlexCard state does not match the DataRaptor Extract's Output JSON Path name.
- D. In the Setup Pabel, {recordId} is misspelled in the Data Source Input Map.
Answer: C
NEW QUESTION 26
Refer to the exhibit.
What JSON from the DRGetAccountDetails action would display all six values correctly in the OmniScript structure shown? BlkContacts is a Repeat Block.
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: D
NEW QUESTION 27
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with actions to close the case and update the case, and it will be styled using the Community's theme.
What must the developer do to configure the FlexCard for deployment in a Community?
- A. Set the Deployment property in Card Configuration to "Community"
- B. Configure the Component Visibility in the Custom Component
- C. Set the Target property in Publish Options to "CommunityPage"
- D. Add the FlexCard's API name to the FlexCard Player component
Answer: C
NEW QUESTION 28
Refer to the exhibit.
The card layout uses an integration Procedure as a data source. The cards use the layout data source.
Which JSON data structure supports this card layout and follows best practices?
A)
B)
C)
- A. Option A
- B. Option B
- C. Option C
Answer: C
NEW QUESTION 29
What is the reason for this? Refer to the exhibit below.
- A. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
- B. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- C. The flag passData.JSON in the parent OmniScript in not configured correctly.
- D. Both parent and embeddedOmniScripts have the same element name for the Set Values element.
Answer: A
NEW QUESTION 30
Which description below best matches what Publish Options does?
- A. Enable grouping FlexCards by object type or by the order they appear in the database
- B. Configure metadata values and set the target for the published FlexCard
- C. Make the FlexCard usable in the OmniScript Designer via the Custom LWC element
- D. Enable a FlexCard to use a Viocity Integration Procedure to return a set of actions
Answer: D
NEW QUESTION 31
How is data accessed for a Field element in a FlexCard that wants the AccountName?
- A. records
- B. AccountName
- C. {records}
- D. {AccountName}
Answer: D
NEW QUESTION 32
A developer needs to build a DataRaptor Transform to send current weatherto both an OmniScript Card Layout. Which of these samples would be valid for the Expected Output JSON?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: A
NEW QUESTION 33
For testing an Omniscript the Contextld is the only key in a Set Values element Before going into production, what are two possible best practices for this Contextld? Choose 2 answers
- A. Add the correct Contextld to the {Data} modal
- B. Do nothing. It will be ignored at runtime.
- C. Delete the Set Values element.
- D. Deactivate the Set Values element.
Answer: A,C
NEW QUESTION 34
A developer needs to configure a DataRaptor to retrieve data from a single object. The structure of the output data does not need to be changed.
Following best practices, which type of DataRaptor should the developer use?
- A. DataRaptor Turbo Extract
- B. DataRaptor Extract
- C. DataRaptor Load
- D. DataRaptor Transform
Answer: A
NEW QUESTION 35
Of the questions listed below, which two are ones you need to answer when you create a DataRaptor Extract?
- A. Which card will be using this DataRaptor? D Which OmniScript template will | be using?
- B. What should | name the JSON node where the data will be sent?
- C. Which sObject or sObjects contain the data | need?
Answer: A,C
NEW QUESTION 36
Which calculation procedure version in the list would execute on 2/15/2020 at 12:00 PM?
- A. Version Number 1
- B. Version Number 3
- C. Version Number 4
- D. Version Number 2
Answer: D
NEW QUESTION 37
In an OmnoScript, a developer needs to configure a Disclosure element to require user input only if the user already checked a Non-Disclosure Agreement Checkbox.
How should the developer configure the conditional view to meet this requirement?
- A. Show element if true
- B. Disable read only if true
- C. Set element to optional if false
- D. Set element to require if true
Answer: B
NEW QUESTION 38
A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. Both parent and embedded OmniScripts have the same element name for the Set Values element.
- B. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- C. The flag passData.JSON in the parent OmniScript in not configured correctly.
- D. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
Answer: B
NEW QUESTION 39
In an Integration Procedure, you need to perform a multi-step calculation on every element of an array. Based on best practices, what two methods are recommended? Choose 2 answers
- A. Use a Calculation Action to call a Calculation Procedure.
- B. Use a Matrix Action to call a Calculation Matrix
- C. Use a Set Values Element inside a Loop Block.
- D. Use a List Action to merge the array elements together.
Answer: A,B
NEW QUESTION 40
In an Integration Procedure, a developer needs to perform a multi-step calculation on every element of an array.
Based on best practices, what two methods are recommended?
Choose 2 answers
- A. Use a Calculation Action to call a Calculation Procedure.
- B. Use a Set Values Element inside a Loop Block.
- C. Use a List Action to merge the array elements together.
- D. Use a Matrix Action to call a Calculation Matrix.
Answer: A,D
NEW QUESTION 41
What are two items you can include on a flyout action? Choose 2 answers
- A. A link to a DataRaptor Load
- B. Another flyout
- C. An OS Action
- D. A link to an Integration Procedure
Answer: C,D
NEW QUESTION 42
......
Salesforce OmniStudio-Developer Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
Pass Your OmniStudio-Developer Dumps as PDF Updated on 2023 With 88 Questions: https://www.dumpsmaterials.com/OmniStudio-Developer-real-torrent.html
Salesforce OmniStudio-Developer Real Exam Questions and Answers FREE: https://drive.google.com/open?id=1pP60_P6rBTgGZY5AxNRLqwrR_kZ89MMl
