2021 Realistic Verified Free F5 301 Exam Questions
301 Real Exam Questions and Answers FREE
NEW QUESTION 10
Which statement concerning virtual servers is true?
- A. Virtual servers cannot perform load balancing without performing address translation.
- B. Virtual servers can reuse connections between the BIG-IP and server for multiple HTTP GETs.
- C. Virtual servers can keep idle server connections open indefinitely.
- D. Virtual servers can compress data between the BIG-IP and servers.
- E. Virtual server processing always translates the virtual server address to the address of the chosen pool member.
Answer: B
NEW QUESTION 11
Which is a potential result when a trunk is configured on a BIG-IP?
- A. No additional trunks can be configuration since each BIG-IP is limited to one trunk
- B. Packets flowing to the VLAN could arrive on any of the interfaces in the trunk
- C. VLAN fail-safe is not available for any VLAN associated with any trunks.
- D. Since any VLANs associated with the trunk are necessarily associated with multiple interfaces, the VLAN using the must use tagged packets.
Answer: B
NEW QUESTION 12
An LTM has the 3 virtual servers, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServerl Destination: 10.10.2.102:443 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNAT1 Source IP: All Addresses SNAT Address: SNAT Pool with 2 members - 172.16.20.50 and 192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1;
10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:2222 and a destination IP and port of 10.10.2.102:80. When the request is processed, what will be the destination IP address?
- A. Destination IP: pool member in the 172.16/16 network
- B. The request will be dropped.
- C. Destination IP: 10.10.2.102
- D. Destination IP: pool member in the 192.168/16 network
Answer: D
NEW QUESTION 13
After editing and saving changes to the configuration file containing virtual servers,
what is the immediate result?
- A. The new configuration is verified and loaded.
- B. The new configuration is loaded but not verified.
- C. The new configuration is verified
- D. The new configuration is verified not loaded.
- E. The new configuration is verified and loaded if is it syntactically correct.
- F. The new configuration is neither verified nor loaded.
Answer: F
NEW QUESTION 14
Which statement describes advanced shell access correctly?
Which statement describes advanced shell access correctly?
- A. Users with advance shell access are limited to changing, adding, or deleting LTM object in any single partition. Users with? Advance shell accesses are limited to changing, adding, or deleting LTM object on any single partition.
- B. Users with advance shell access have the same right as those with msh access, but the right extend to all partition rather than to Users with advance shell access have the same right as those with msh access, but right extend to all partition rather than to a single partition.
- C. All Users can be given advanced shell access. All users can be given advance shell access.
- D. Users with advanced shell access can always change, add, or delete LTM objects in all partition. Users with? Advanced shell access can always, change, add, or delete LTM objects in all partitions.
Answer: D
NEW QUESTION 15
Which statement is true concerning SNATs using SNAT pools and SNATs using automap?
- A. SNAT s using a SNAT pool translate source addresses randomly to any of the addresses in the SNAT pool.
- B. SNAT s using automap preferentially translate source addresses to non-floating self-IP addresses.
- C. SNAT s using automap translate source addresses randomly to any of the BIG-IP's floating self-IP addresses.
- D. A .SNAT pool can contain virtual server addresses.
Answer: B
NEW QUESTION 16
Which action CANNOT be performed by an iRule?
- A. Discard a client before connecting to a server.
- B. Direct a connection request to a specific pool.
- C. Chang the virtual server's default pool.
- D. Limit a given client to a set amount of bandwidth.
- E. Substitute a server's response with alternate data.
- F. Direct a client's request to a pool based on the client's browser's language.
Answer: C
NEW QUESTION 17
A BIG-IP has two SNATs, a pool of DNS servers and a virtual server configured to load-balance UDP traffic to the DNS servers. One SNAT's address is 64.100.130.10; this SNAT is defined for all addresses.
The second SNAT's address is 64.100.130.20; this SNAT is
defined for three specific addresses, 172.16.3.54, 172.16.3.55, and 172.16.3.56. The virtual server's destination is
64.100.130.30:53.
The SNATs and virtual server have default VLAN associations. If a client with IP address 172.16.3.55 initiates a request to the virtual server, what is the source IP address of the packet as it reaches the chosen DNS server?
- A. 64.100.130.10
- B. 64.100.130.20
- C. 64.100.130.30
- D. 172.16.3.55
Answer: B
NEW QUESTION 18
A monitor has been defined with an alias port of 443. All other options are left at their defaults. The administrator
wishes to assign it to a pool of members where the members' ports vary. Which is the result?
- A. For each member, the monitor will test member node at port 443. For each member, the monitor will test the member ? node at port 443.
- B. This assignment is not allowed since the port do not match.
- C. For each member. If it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member for each member, if it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member will be marked down.
- D. For each member, if the member port is not 443, the member will be marked down. For each member,if the member? Port is not 443, the member will be marked down.
Answer: A
NEW QUESTION 19
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined, and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. Vi rtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap configured Vi rtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network Vi rtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNAT1 Source IP: 10.10.0.0 netmask 255.255.0.0 SNAT Address: SNAT Pool with 2 members
172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNATAddress:
10.10.2.102 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1
- A. Source IP: 10.10.2.1; Destination IP: 10.10.2.10
- B. Source IP: Either 172.16.20.50 or 192.168.10.50; Destination IP: 10.10.2.10
- C. connection attempt is made with a source IP and port of 10.10.100.50:2222 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the source and destination IP addresses?
- D. Source IP: 10.10.2.1; Destination IP: pool in the 172.16/16 network C
- E. The request will be droped.
- F. Source IP: 10.10.2.102; Destination IP 10.10.2.10
Answer: B
NEW QUESTION 20
How is traffic flow through transparent virtual servers different from typical virtual servers?
- A. the value in the tcp acknowledgement field
- B. an IP address
- C. any text string within a cookie
- D. any bytes within the initial client request packet
Answer: B,C
NEW QUESTION 21
What does the nsert XForwarded For?
option in an HTTP profile do?
What does the ?nsert XForwarded For?option in an HTTP profile do?
- A. A BIG-IP self-IP is inserted in the source address field on the server-sid connection.
- B. A BIG-IP self-IP is inserted in the source address field on the clint-side connection.
- C. The client IP addresses are inserted into HTTP header.
- D. The client IP addresses are inserted into messages sent to remote syslog servers.
Answer: C
NEW QUESTION 22
What occurs when a load?command is issued?What occurs when a ? load?command is issued?
- A. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80{priority- group 2}}
- B. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80}
- C. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80{} }
- D. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {170.16.20.1:80}
Answer: D
NEW QUESTION 23
How many events can be referenced in a given iRule?
- A. Exactly one.
- B. iRules can have multiple events.
- C. iRules can have up to event if one is client-side and one is server-side.
- D. iRules are limited to one event, but a virtual server could be associated with multiple rules.
Answer: B
NEW QUESTION 24
Could an iRule perform persistence based on a cookie?
- A. Yes An iRule could be designed to persist based on the contents of a cookie.
- B. Yes. An iRule could be desiged to persist based on the contents of a cookie.
- C. No. Cookie persistence is only is based on a cookie persistence profile.
- D. No. iRules cannot affect persistence.
Answer: B
NEW QUESTION 25
QUESTION NO: 34. Click the Exhibit Button an LTM has the 3 virtual servers, a SNAT defined, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServer 1 Destination: 10.10.1.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap enabled VirtualServer2 Destination: 10.10.1.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer 3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: All Addresses SNAT Address: SNAT Pool with 2 members -
172.16.20.50 and
192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:80 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 10.10.2.1; Destination IP: 10.10.2.10
- B. Source IP: Either 172.16.20.50 or 192.168.10.50; Destination IP: 10.10.2010
- C. Source IP: 10.20.100.50; Destination IP: 10.10.2.10
- D. The request will be dropped.
Answer: B
NEW QUESTION 26
When a pool is created and saved to file, where is the default file and location for the pool configuration? When a pool is created and saved to file, where is the default file and location for the pool configuration?
- A. /etc/bigip_base.conf
- B. /config/BigDB.dat
- C. /config/bigip_base.conf
- D. lconfig/bigip.conf
Answer: D
NEW QUESTION 27
Given the configuration shown below, if a connection request arrived on the BIG-IP with a source address of 200.10.10.10:1050 and a destination of 150.10.10.75:80, what would the source IP address of the associated packet be when it arrived on the choosen member of the web_pool self
150.10.10.1 { netmask 255.255.255.0 unit I floating enable vlan external allow tcp https } self
10.10.1.1 { netmask 255.255.255.0 unit I floating enable vlan internal allow default } pool web_pool { member 10.10.1.11:80 member 10.10.1.12:80 member
10.10.1.13:80 }snatpool client_pool { member 10.10.1.100 member 150.10.10.15 } virtual VS_web { destination 150.10.10.10:80 ip protocol tcp snat automap pool web_pool }virtual VS_network{ destination 150.10.1 0.0:any mask
255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool } virtual VS_network { destination 150.10.1 0.0:any mask 255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool } virtual VS_network { destination 150.10.10.0:any mask 255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool }
- A. 200.10.10.I0D.200.10.10.10
- B. 10.10.1.I10.10.1.1
- C. 150.10.10.15C.150.10.10.15
- D. 10.10.1.I00B.10.10.1.100
Answer: D
NEW QUESTION 28
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. VirtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.1 61.16 network SNAT Automap configured V VirtualServer2 Destination: 10.10.2.102:* netmask
255.255.255.255 Transparent with 3 pool members
in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: 10.10.0.0 netmask 255.255.0.0 SNAT Address: SNAT Pool with 2 members
172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNAT Address: 10.10.2.103 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:2222 and a destination IP and port of 10.10.2.102:443. When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 10.10.201; Destination IP: pool member in the 192.168/16 network G
- B. Source IP: 10.10.2.103; Destination IP: pool member in the 192.168/16 network
- C. Source IP: 10.10.201; Destination IP: 10.102.102
- D. Source IP: 10.10.2.103; Destination IP: 10.10.2.102
- E. The request will be dropped.
- F. Source IP: 10.20.10.50; Destination IP: pool member in the 192.168/16 network
Answer: D
NEW QUESTION 29
......
Sample Questions
An LTM device is monitoring pool members on port 80. The LTM device is using an HTTP monitor with a send string of GET / and a blank receive string. What would cause the pool members to be marked down?
- A pool member responds with an HTTP 300 series response code
- A pool member responds with an HTTP 200 series response code
- A pool member responds with an HTTP 400 series response code
- A pool member responds with an HTTP 500 series response code
- A pool member does NOT acknowledge the connection SYN on port 80
An LTM device is monitoring three pool members. One pool member is being marked down. What should the LTM Specialist enable to prevent the server from being flooded with connections once its monitor determines it is up?
- Packet shaping
- Manual resume
- Hold down timer
- Fastest load balance algorithm
- Slow ramp timer
An LTM HTTP pool has an associated monitor that sends a string equal to ‘GET /test.html’. Which two configurations could an LTM Specialist implement to allow server administrators to disable their pool member servers without logging into the LTM device? (Choose two.)
- Set “ÃÂalias"⢠equal to ‘SERVER DOWN"⢠and ask the server team to set string"ÃÂSERVER DOWN"⢠in test.html
- Set monitor to transparent and ask the server team to set string “ÃÂTRANSPARENT"⢠in test.html
- Set “ÃÂreceive disable string"⢠equal to ‘SERVER DOWN"⢠and ask the server team to set string"ÃÂSERVER DOWN"⢠in test.html
- Set “ÃÂdisable pool member"⢠equal to ‘SERVER UP"⢠and ask the server team to set string"ÃÂSERVER DOWN"⢠in test.html
- Set “ÃÂreceive string"⢠equal to ‘SERVER UP and ask the server team to set string “ÃÂSERVER DOWN"⢠in test.html
Certification Path of 301a - LTM Technology Specialist
Acquiring the F5-CTS LTM accreditation requires breezing through two tests â BIG-IP LTM Specialist: Architect, Setup, and Deploy (Exam 301a) and BIG-IP LTM Specialist: Maintain and Troubleshoot (Exam 301b).
How to study the 301a - LTM Technology Specialist
One of the selling points of this training test is that each question contains definite clarifications that will help you acquire a more profound comprehension of the AWS administrations. It clarifies what the right answer is, yet in addition clarifies why different answers aren’t right. It is very useful to have you perceive the effect between comparable administrations.
These F5 301 dumps are incredibly valuable, they give you a speedy outline of the significant AWS administrations that you need to realize to have the option to finish the AWS affirmation tests. They are compact and simple to peruse and follow. Quite possibly the most supportive parts is the examination of comparative administrations. Frequently in the test, there are two comparable answers that appear can tackle the issues of the given situations. Be that as it may, the minor distinction between the administrations prompts one answer however not the other. Comfortable yourself with every one of the administrations with the examination table/diagram assists you with finishing the test. Keen Candidates who need to fabricate a strong establishment in all test themes and related advances typically join video addresses with study advisers for receive the rewards of both however there is one urgent planning apparatus as frequently disregarded by most applicants the training tests. Practice tests are worked to make understudies OK with the genuine test climate. Measurements have shown that most understudies bomb not because of that readiness however because of test nervousness the dread of the obscure. Certificate questions.com master group prescribes you to set up certain notes on these themes alongside it remember to rehearse 301a - LTM Technology Specialist dumps which been composed by our master group, Both these will help you a great deal to clear this test with great imprints.
In spite of the fact that it is prescribed to peruse all the connected whitepapers and gain proficiency with every one of the ideas and methodologies from them, you can likewise gain rapidly from F5 301 practice exam and F5 301 practice tests. AWS has quite recently refreshed the whitepapers of the Well-Architected Framework and the Five Pillars. On the off chance that you have adequate time, perusing those whitepapers will be an extraordinary enhancement to your test arrangements and will help you acquire a superior comprehension of the diverse AWS administrations.
Exam Dumps 301 Practice Free Latest F5 Practice Tests: https://www.dumpsmaterials.com/301-real-torrent.html
