100% Pass Your 1Y0-241 Exam Dumps at First Attempt with DumpsMaterials
Penetration testers simulate 1Y0-241 exam PDF
NEW QUESTION 12
A Citrix Administrator needs to configure a rate-limiting policy setting DNS requests to a threshold of 1,000 per second.
Which command does the administrator need to run to correctly configure this policy?
- A. SYS.CHECK.LIMIT(<limit_identifier>) || CONNECTION.IP.LIMIT(<limit_identifier>)
- B. SYS.CHECK.LIMIT(<limit_identifier>)
- C. HTTP.REQ.LIMIT(<limit_identifier>)
- D. SYS.CHECK.LIMIT(<limit_identifier>) || HTTP.REQ.LIMIT(<limit_identifier>)
Answer: B
NEW QUESTION 13
The Citrix ADC SDX architecture allows instances to share ___________ and __________. (Choose the two correct options to complete the sentence.)
- A. a CPU
- B. the kernel
- C. memory
- D. a physical interface
Answer: A,C
NEW QUESTION 14
Scenario: The policies below are bound to a content switching vServer.
bind cs vServer vserver1 -policyName CSPOL_7 -priority 100 -gotoPriorityExpression NEXT bind cs vServer vserver1 -policyName CSPOL_5 -priority 90 bind cs vServer vserver1 -policyName CSPOL_9 -priority 110 bind cs vServer vserver1 -policyName CSPOL_4 -priority 120 bind cs vServer vserver1 -policyName CSPOL_8 -priority 210 Policy CSPOL_7 has been invoked.
Which policy will be invoked next?
- A. CSPOL_9
- B. CSPOL_4
- C. CSPOL_5
- D. CSPOL_8
Answer: C
NEW QUESTION 15
Which Citrix ADC monitor can a Citrix Administrator use to check the authentication service of the Active Directory (AD) domain controller?
- A. A TCP monitor with the LDAP Base DN configured in the basic parameters.
- B. An LDAP monitor with the LDAP Script Name, Configured Base DN, Bind DN, Filter, Attribute and Password parameters in the basic parameters.
- C. A ping monitor with the IP address of the AD domain controller in the special parameters
- D. A MYSQL-ECV monitor with the Base DN, Bind DN, Filter, Attribute, and Password parameters configured in the basic parameters
Answer: B
NEW QUESTION 16
A Citrix Administrator needs to match the host name 'www.example.com' in all HTTP requests.
Which expression, when used, meets this requirement?
- A. HTTP.REQ.HOSTNAME.EQ("www.example.com")
- B. HTTP.RES.HOSTNAME.CONTAINS("www.example.com")
- C. HTTP.RES.HOSTNAME.EQ("www.example.com")
- D. HTTP.REQ.HOSTNAME("example.com")
Answer: B
NEW QUESTION 17
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?
- A. Purchase another Citrix ADC MPX appliance.
- B. Add two more 10G Citrix ADC ports to the network and configure VLAN.
- C. Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).
- D. Plug another 10G Citrix ADC port into the router.
Answer: C
NEW QUESTION 18
Scenario: A Citrix Administrator is running an e-commerce web service that uses backend SQL and RADIUS servers. The e-commerce platform runs on a web server using port 80, and a website status page on port 99 reports the status of all servers.
Which monitor should the administrator choose to confirm the availability of the e-commerce solution?
- A. HTTP on port 99
- B. HTTP on port 80
- C. HTTP_ECV on port 99
- D. HTTP-ECV on port 80
Answer: C
NEW QUESTION 19
Scenario: While using the GUI, a Citrix ADC MPX appliance becomes unresponsive. A Citrix Administrator needs to restart the appliance and force a core dump for analysis.
What can the administrator do to accomplish this?
- A. Use the reset button on the front of the appliance.
- B. Connect to a USB port to issue a restart command.
- C. Turn off the appliance using the power button.
- D. Use the NMI button on the back of the appliance.
Answer: D
NEW QUESTION 20
A Citrix Administrator needs to protect the HTTP backend server type without actually removing the header.
Which rewrite action type can the administrator apply to the Citrix ADC configuration to accomplish this?
- A. REPLACE
- B. CORRUPT_HTTP_HEADER
- C. REPLACE_HTTP_REQ
- D. REPLACE_ALL
Answer: A
NEW QUESTION 21
A Citrix Network Engineer informs a Citrix Administrator that a data interface used by Citrix ADC SDX is being saturated.
Which action could the administrator take to address this bandwidth concern?
- A. Configure LACP on the SDX for management interface.
- B. Configure LACP on the SDX for the data interface.
- C. Configure a failover interface set on each Citrix ADC VPX instance.
- D. Add a second interface to each Citrix ADC VPX instance.
Answer: B
NEW QUESTION 22
Scenario: A Citrix Administrator manages an environment that has three SSL websites, all serving the same content.
www.company.com
www.company.net
www.company.org
The administrator would like to consolidate the websites into a single, load-balanced SSL vServer.
What can the administrator bind to use a single SSL vServer?
- A. A wildcard certificate to a content-switching vServer
- B. A multiple SAN certificate to a single SSL vServer
- C. A wildcard certificate to a single SSL vServer
- D. The certificate of each website to a single SSL vServer
Answer: D
NEW QUESTION 23
When a Citrix ADC high availability (HA) pair failover occurs, by what method does the Citrix ADC communicate to the network switches and routers that IP-to-MAC address bindings have changed?
- A. Proxy ARP to update the network devices
- B. MAC-based forwarding (MBF) to update the routers
- C. Gratuitous ARPs (GARPs) to update the network devices
- D. Reverse ARP (RARP) to update the network devices
Answer: C
NEW QUESTION 24
Scenario: A Citrix Administrator configured an authentication, authorization, and auditing (AAA) policy to allow users access through the Citrix ADC. The administrator bound the policy to a specific vServer.
Which policy expression will allow all users access through the vServer?
- A. false
- B. ns_true
- C. ns_false
- D. true
Answer: D
NEW QUESTION 25
Which two steps are necessary to configure global server load balancing (GSLB) service selection using content switching (CS)? (Choose two.)
- A. Bind the domain to the CS vServer instead of the GSLB vServer.
- B. Configure CS policies that designate a load-balancing vServer as the target vServer.
- C. Configure a CS vServer of target type GSLB.
- D. Bind the GSLB domain to the GSLB vServer.
Answer: B,C
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/global-server-load-balancing/how-to/ configure-gslb-content-switch.html
NEW QUESTION 26
Scenario: After deploying a Citrix ADC in production, a Citrix Administrator notices that client requests are NOT being evenly distributed among backend resources. The administrator wants to change from the default load-balancing method to one that will help distribute the load more evenly.
Which load-balancing method would ensure that the server with the least amount of network utilization is receiving new connections?
- A. Least packets
- B. Least bandwidth
- C. Least connection
- D. Least response time
Answer: C
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/getting-started-with-citrix-adc/load- balancing.html
NEW QUESTION 27
Which Citrix ADC Access Control List (ACL) command can a Citrix Administrator use to bridge traffic originating from the IP address 192.168.10.200?
- A. add ns acl6
- B. add ns simpleacl6
- C. add ns acl
- D. add ns simpleacl
Answer: C
NEW QUESTION 28
......
All 1Y0-241 Dumps and Training Courses: https://www.dumpsmaterials.com/1Y0-241-real-torrent.html
Help candidates to study and pass the Deploy and Manage Citrix ADC 13 with Traffic Management Exams hassle-free: https://drive.google.com/open?id=1wWczQ-bkuLyJNpQrOcRJRP2YyVwBWuiR
